Linhenykus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a

Xu, Xing, Upchurch, Paul, Ma, Qingyu, Pittman, Michael, Choiniere, Jonah, Sullivan, Corwin, Hone, David W. E., Tan, Qingwei, Tan, Lin, Xiao, Dong & Han, Fenglu, 2013, Osteology of the Late Cretaceous alvarezsauroid Linhenykus monodactylus from China and comments on alvarezsauroid biogeography, Acta Palaeontologica Polonica 58 (1), pp. 25-46 : 26-40

Genus Linhenykus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a

Type species: Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a ; see below.

Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a

Figs. 1–12 .

Type locality.—Coordinates in decimal degrees: N41.74392 E106.74436. Bayan Mandahu, “Gate Locality”, Wulansuhai Formation.

Type horizon.—Campanian, Late Cretaceous ( Jerzykiewicz et al. 1993).

Material.— The taxon is only represented by the holotype specimen, IVPP V17608 , a partial postcranial skeleton including 4 partial cervical vertebrae, 3 partial dorsal vertebrae, 5 partial sacral vertebrae, 13 caudal vertebrae, a fragmentary anterior or middle chevron, part of the left scapulocoracoid, a nearly complete sternum, the distal ends of the right humerus and left ulna, the left radiale, the left metacarpals II and III and the phalanges of the left digit II, part of the right metacarpal II, the incomplete right phalanx II−1 and complete right phalanx II−2, part of the left ilium, the proximal end of the left pubis, the almost complete right and left femora and tibiae, parts of the right and left astragalus−calcaneum complexes, the nearly complete left metatarsus, the distal end of the right metatarsal IV, and all of the left pedal phalanges other than IV−4 and IV−5, although phalanges II−2, III−1, and III−3 are only partially preserved ( Fig. 1 ) .

Diagnosis.—A small parvicursorine apomorphically possessing a transversely compressed metacarpal III without a distal articular surface; also differs from all other parvicursorines in having a longitudinal ventral furrow along the entire length of each cervical centrum, diapophyseal ridges on each cervical vertebra that extend to the posterodorsal rim of the centrum, extremely weak, ridge−like epipophyses on the postzygapophyses of the middle cervical vertebrae, large pneumatic foramina in the mid−dorsal vertebrae, and anteriormost caudal vertebrae whose centra are amphiplatyan and whose neural spines are located completely posterior to the neural pedicles.

Description and comparisons

The specimen is small, with an estimated femoral length only slightly exceeding 70 mm. On the basis of this estimate, IVPP V 17608 is only about half of the size of the holotype of Mononykus olecranus ( Perle et al. 1993, 1994), but is considerably larger than that of Parvicursor remotus ( Suzuki et al. 2002) . IVPP V 17608 is estimated to have a body mass of approximately 450 g based on an empirical equation using femoral length as a predictor ( Christiansen and Fariña 2004). All of the preserved vertebrae have completely closed neurocentral sutures. However, intercentral sutures are evident between successive sacral vertebrae, metacarpal III is not fused to metacarpal II, and the proximal tarsals are not completely co−ossified with the tibia. Although caution is warranted when relying on neurocentral fusion as a sole indicator of ontogenetic stage ( Irmis 2007), the presence of other ontogenetically−informative fusion in the vertebral and appendicular skeleton (above) suggests a relatively late ontogenetic stage for IVPP V 17608, with sub−adult being more likely than adult.

Axial skeleton

The axial skeleton is represented by 4 partial cervical vertebrae, 3 partial dorsal vertebrae, 4 partial sacral vertebrae, and 13 caudal vertebrae. Most of the preserved neural arches are incomplete, and some vertebrae are only represented by broken centra.

Cervical vertebrae.—Four cervical vertebrae are preserved, but only one is relatively complete. They might represent anterior and middle cervical vertebrae, based on the morphol−

http://dx.doi.org/10.4202/app.2011.0083

ogy of the ventral surfaces of the centra and the locations of the postzygapophyses ( Fig. 2 ).

The preserved cervical centra are strongly opisthocoelous, a condition also seen in Shuvuuia and Mononykus ( Chiappe et al. 2002) but not in Haplocheirus ( Choiniere et al. 2010) and Alvarezsaurus ( Bonaparte 1991) . Unknown cervical articular geometries for other alvarezsauroids makes it difficult to reconstruct the distribution of cervical opisthocoely across the alvarezsauroid tree but it appears to have been present by at least the Parvicursorinae node although cervical opisthocoely has also been proposed, tentatively, to be present in Patagonykus ( Novas 1996, 1997; Chiappe et al. 2002). Future discoveries will be important in testing this hypothesis. The cervicals also resemble their counterparts in other alvarezsaurids in that the condyle on the anterior surface of each cervical centrum is distinctly smaller than the articular surface. The cervical centra are mediolaterally compressed in such a way that their lateral surfaces are moderately concave, and their ventral surfaces are narrow as in Mononykus , Parvicursor , and probably Patagonykus ( Novas 1997) . In lateral view, the cervical centra are long and low, as in other alvarezsauroids. An oblique ridge (posterior centrodiapophyseal lamina) runs from the diapophysis to the posterodorsal corner of each middle cervical centrum. In ventral view, two sharp ridges run along the edges of the centrum, flanking a midline furrow on the narrow ventral surface. These two ridges approach each other near the mid−length of the centrum, so that the furrow widens anteriorly and posteriorly. In Shuvuuia and Mononykus , a similar furrow is present, but occupies only the anterior half of the ventral surface ( Chiappe et al. 2002). In Linhenykus carotid processes appear to be present, but are confluent with the anterior ends of the ridges. Carotid processes are known in derived alvarezsauroids Shuvuuia and Mononykus , and some ornithomimosaurs, oviraptorosaurs, dromaeosaurids, troodontids and avialans as well. Subcircular pneumatic foramina are located immediately posterior to the parapophyses as in Alvarezsaurus and Shuvuuia . Pneumatic foramina have not been reported in Mononykus or Parvicursor . The foramina are proportionally large (about 3 mm in diameter on a cervical centrum with an estimated length of 9 mm), but this appears to be partly an artifact of preservation.

The neural pedicles are mediolaterally broad and dorsoventrally low. The anterior edge of each pedicle is flush with the anterior articular surface (excluding the condyle) of the centrum, but the posterior edge is located considerably anterior to the posterior articular surface. The parapophyses are low, laterally projecting eminences, and the diapophyses are represented by thin tubercles that are connected to the prezygapophyses by prezygodiapophyseal laminae. The prezygapophyses are set well lateral to the centra. Their articular surfaces face nearly medially and only slightly dorsally, suggesting that lateral bending within the cervical column was rather restricted. The prezygapophyseal processes have a strong dorsal orientation, particularly in the more posterior cervical vertebrae in which the prezygapophyseal processes barely protrude anteriorly beyond the intercentral articulation. The postzygapophyseal processes diverge strongly away from the midline and also have a strong dorsal orientation. In the anterior cervical vertebrae the postzygapophyseal processes are located anterior to the intercentral articulation, whereas in the middle ones the postzygapophyseal process are at the level of the intercentral articulation. The postzygapophyses each have a nearly straight medial edge and a convex lateral edge in dorsal view, as in other Asian alvarezsaurids ( Chiappe et al. 2002). In Alvarezsaurus the postzygapophyses are paddle−shaped due to the presence of a convex medial edge ( Bonaparte 1991). No epipophyses are apparent on the postzygapophyses of the posterior cervical vertebrae of Linhenykus , but extremely weak, ridge−like epipophyses are present in the middle cervical vertebrae. The neural spines of the middle cervical vertebrae are extremely low and very short anteroposteriorly, and possess shallow interspinous ligament fossae on their posterior margins. The neural canal is proportionally large in the cervical centra, a feature of alvarezsaurids generally ( Chiappe et al. 2002).

Cervical ribs are not preserved, but there is no evidence that they were fused to the cervical vertebrae. In Shuvuuia ( IGM 100/977), the ribs of the anterior cervical vertebrae are partially fused to the diapophyses and fully fused to the parapophyses. Dorsal vertebrae.—One of the three preserved dorsal vertebrae probably comes from the middle part of the dorsal region, while the other two are preserved in articulation with each other and probably represent posteriormost dorsal vertebrae ( Fig. 3 ). The neurocentral sutures are all closed, leaving no visible traces. Each dorsal vertebra has a mediolaterally compressed centrum with a sharp ventral midline ridge, as in Mononykus ( Perle et al. 1994) but in contrast to Shuvuuia ( Chiappe et al. 2002; Suzuki et al. 2002) and Xixianykus ( Xu et al. 2010) in which the posteriormost dorsal centra are transversely narrow but not ventrally ridged. The articular surfaces of the dorsal centra are sub−triangular in outline, unlike the ovoid ones in Shuvuuia ( IGM 100/977) and Xixianykus ( Xu et al. 2010) . The middle dorsal vertebra is opisthocoelous, with a convex, knob−like anterior projection that is significantly smaller than the articular surface. The condyle appears to be even smaller, relative to the anterior intercentral articular surface, in the presacral vertebrae of other known parvicursorines such as Mononykus and Shuvuuia ( Perle et al. 1994, Chiappe et al. 2002). The centrum of the middle dorsal vertebra is slightly greater in transverse width than in dorsoventral depth, unlike Shuvuuia ( IGM 100/977), which has transversely much wider posterior articular surface relative to the dorsoventral depth. Large openings, which are probably pneumatic foramina, are present on both sides of the centrum, which terminate on the neurocentral suture and have a diameter equal to approximately half the length of the centrum. The left and right foramina are continuous across the midline of the centrum, but this condition is presumably a result of postmortem damage. This is the first known example of a pneumatic dorsal vertebra among alvarezsauroids ( Chiappe et al. 2002, Choiniere et al. 2010). The posterior dorsal vertebrae probably represent the last and the second to last in the dorsal sequence. The penultimate dorsal has a biconvex centrum. Biconvex dorsal vertebrae are also known in Xixianykus ( Xu et al. 2010) , Mononykus and Shuvuuia ( Chiappe et al. 2002) , but in Xixianykus ( Xu et al. 2010) , and probably Mononykus and Shuvuuia ( Chiappe et al. 2002) it is the last dorsal vertebra that has a biconvex centrum. The last dorsal has an anteriorly concave centrum, but its posterior end is broken. Neither posterior dorsal vertebra bears a pneumatic fossa or foramen on the lateral surface of the centrum. The anterior and posterior articular surfaces of the penultimate dorsal vertebra each bear a condyle that occupies the whole area of the articular surface, in contrast to the reduced anterior condyle of the middle dorsal vertebra, a condition that is present in all the dorsals of Mononykus and Xixianykus ( Perle et al. 1994; Xu et al. 2010). The centrum of the last dorsal vertebra is considerably larger than the other preserved dorsal centra, and is mediolaterally wider than dorsoventrally deep.

The parapophyses are located on small projections at the bases of the prezygapophyseal processes, and lie approximately on a level with the diapophyses as in other parvicursorines ( Chiappe et al. 2002; Longrich and Currie 2009). A horizontal paradiapophyseal lamina ( Wilson 1999) overhangs the large pneumatic foramen on the preserved middle dorsal vertebra, but is lacking in the penultimate dorsal vertebra. The neural arches of all three dorsal vertebrae are low in lateral view. The prezygapophyses of the middle dorsal vertebra are considerably lower than the postzygapophyses, which are very close to the midline. The neural spine is small and low and posterodorsally oriented on the middle dorsal vertebra and probably also on the posterior dorsal vertebrae, though the neural spines of the posterior dorsals are not complete. In Mononykus and Shuvuuia ( Perle et al. 1994; Chiappe et al. 2002), the neural spines of the middle dorsals are large and high. As in other parvicursorines ( Chiappe et al. 2002; Longrich and Currie 2009), there are no hyposphene−hypantrum articulations unlike the basal alvarezsauroids Haplocheirus and Patagonykus where such articulations are present ( Novas 1997; Choiniere 2010). The neural canal is large relative to the centrum as in other alvarezsaurids ( Chiappe et al. 2002).

Sacral vertebrae.—One isolated sacral vertebra and two sets of two fragmentary sacral vertebrae in articulation are present ( Fig. 4 ). Two of the fragmented ends fit closely together, suggesting that the two sets might actually represent three consecutive sacral vertebrae, but this cannot be confirmed. Therefore, a minimum of four and a maximum of five sacral centra are represented. The isolated one is likely to be the second to last sacral vertebra and the other three are likely to be the third, fourth and fifth to last one. For convenience, we refer to these sacral vertebrae as sacral A through sacral D, with A being the most anterior in the sequence. Shuvuuia and Xixianykus have seven sacral vertebrae ( Chiappe et al. 2002; Xu et al. 2010), but more primitive alvarezsaurids have as few as five sacrals ( Novas 1996; Chiappe et al. 2002), so we cannot be sure how many were present in Linhenykus . All of the preserved sacral vertebrae are opisthocoelous, though sacral D is only very weakly so. The opisthocoelous condition appears to be present in at least the first sacral vertebra of Parvicursor ( Karhu and Rautian 1996; Chiappe et al. 2002). Most other alvarezsaurids, including Patagonykus and Xixianykus , have procoelous sa−

http://dx.doi.org/10.4202/app.2011.0083

cral vertebrae ( Novas 1996; Chiappe et al. 2002; Xu et al. 2010). All of the preserved sacral centra are laterally compressed as in other alvarezsaurids ( Chiappe et al. 2002), and the compression becomes stronger posteriorly. However, the anterior ends of sacrals B and C are only slightly compressed, so that they form a prominent anterior margin relative to the laterally compressed central main body. This feature is present to a degree in the first sacral vertebrae of other alvarezsaurids such as Xixianykus ( Xu et al. 2010) , but otherwise is not characteristic of the group. The mediolateral width/dorsoventral height ratio of the anterior end of sacral B is about 1.9. Relatively wide anterior and middle sacral centra are also known in Xixianykus ( Xu et al. 2010) . The anterior articular surfaces of the four sacral vertebrae are semi−circular in outline, with the mediolateral width much greater than the dorsoventral height. The posterior articular surfaces of sacrals A and B are sub−trapezoidal in outline, with the mediolateral width again much greater than the dorsoventral height. However, the posterior surface of sacral D is triangular in outline, with the mediolateral width much smaller than the dorsoventral height. There appears to be a groove on the ventral surface of sacral A, which extends posteriorly onto the ventral surface of sacral B. A ventral groove is also known in Alvarezsaurus ( Bonaparte 1991) , Xixianykus ( Xu et al. 2010) , and an unnamed alvarezsaurid from Mongolia ( Longrich and Currie 2009), though the length of the groove varies among these taxa. The preserved anterior half of sacral C is ventrally keeled, whereas the ventral surface of sacral D is strongly keeled over all but the anteriormost part of its length. The sacral rib of sacral B arises from nearly the whole length of the lateral surface of the centrum, but is slightly offset towards the anterior end of the vertebra. The sacral fenestrae appear to be large, and the successive sacral ribs appear not to be fused to form a large lamina as in Xixianykus ( Xu et al. 2010) . In contrast to the smooth transition from the lateral surface of the centrum to the ventral surface of the sacral rib, a distinct notch is visible in anterior view between the lateral edge of the anterior end of the centrum and the ventral surface of the sacral rib.

Caudal vertebrae.—There are 13 caudal vertebrae preserved, some of which are fragmentary ( Figs. 5 and 6 ). We have numbered these caudal vertebrae in an anatomically anteroposterior order (C1 through C13), although they may not represent a continuous series. Position in the numbering sequence was determined on the basis of size, in addition to the relative development and positioning of such features as neural spines, transverse processes, and ventral keels. C1–3 probably represent the true first through third caudal vertebrae; C4–6 possibly come from the middle region of the anterior caudal series; C7–9 from the posterior region of the anterior caudal series; C10–12 from the middle caudal series; and C13 from the anterior region of the posterior caudal series.

All of the preserved caudal vertebrae are mediolaterally compressed, and the compression is greater in the more anterior caudal vertebrae. C1 displays an extremely weak opisthocoelous condition; C2 has a slightly convex anterior intercentral articular surface and a prominent condyle on the posterior intercentral articular surface; and all of the other caudal vertebrae are procoelous. In other alvarezsaurids including Alvarezsaurus and Patagonykus , all of the caudal vertebrae are procoelous ( Novas 1996; Chiappe et al. 2002). Most of the preserved caudal vertebrae, with the exception of C1–3, are marked by a longitudinal furrow that runs along the entire ventral surface of the centrum and is bordered laterally by two ventral keels. This feature is also known in some other alvarezsaurids such as Shuvuuia ( Chiappe et al. 2002) . All of the preserved neural arch pedicles are positioned anteriorly on the centra as in other alvarezsaurids ( Chiappe et al. 2002). The pedicles of the anterior caudals (C1–9) are each restricted to the anterior half of the corresponding centrum, but the pedicles of the more posterior caudal vertebrae each cover most of the corresponding centrum’s length. The intercentral foramina are large due to the strong dorsal orientation of the zygapophyses.

C1 preserves only the centrum. It is sub−equal in anteroposterior length to the second last sacral vertebra, but is much greater in central height. The centrum is strongly compressed laterally, and the ventral margin forms a sharp keel that renders the anterior and posterior intercentral articular surfaces triangular in outline. C2 and C3 slightly exceed C 1 in anteroposterior length. C2 and C3 each have a sharp ventral keel like C1, but only the anterior intercentral articular surface of C2 shares the triangular outline of the intercentral articular surfaces of C1. Caudal vertebrae with sharp ventral keels are also present in Shuvuuia , Parvicursor , Xixianykus , and Alvarezsaurus , but there are only two such caudals known in Shuvuuia and only one each in Parvicursor , Xixianykus , and Alvarezsaurus ( Chiappe et al. 2002; Xu et al. 2010). The posterodorsally−oriented neural spine of C2 is short anteroposteriorly and low dorsoventrally. The neural spine is located completely posterior to the neural pedicles, lying at the level of the postzygapophyses. The same condition is seen in some other parvicursorines such as Shuvuuia ( Chiappe et al. 2002) , though in other taxa the neural spine is slightly more anteriorly located. C3 exhibits transverse processes located at the bases of the prezygapophyseal processes. The long axis of the cross section of each transverse process is slightly oblique (anterodorsally−posteroventrally). As in Xixianykus ( Xu et al. 2010) and Shuvuuia ( Chiappe et al. 2002) , the bases of the transverse processes are anteriorly located, even projecting slightly beyond the anterior articular surface of the centrum. The prezygapophyseal processes have a strong dorsal orientation, and extend considerably beyond the intercentral articulation.

http://dx.doi.org/10.4202/app.2011.0083

C4–13 are similar to each other in general morphology, though there are minor structural variations among the individual vertebrae. As in parvicursorines but unlike in Alvarezsaurus and Haplocheirus ( Bonaparte 1991; Choiniere 2010; Choiniere et al. 2010), the vertebrae gradually become shorter anteroposteriorly and lower dorsoventrally along the caudal series, although C10 is longer than the preceding vertebra. The anterior intercentral articular surfaces of C3–13 are sub−trapezoidal in outline. The neural arch pedicles extend further posteriorly on the centra of the posterior caudal vertebrae than on the centra of the anterior ones. Transverse processes are present in all preserved caudal vertebrae, though they become greatly reduced in size posteriorly. The position of the transverse processes becomes more posterior, and slightly more ventral, in the more posterior caudal vertebrae. The transverse processes are located close to the anterior intercentral articular surface in C4, but are close to the posterior articular surface in C13. These processes are posterolaterally oriented throughout the caudal series, as in Shuvuuia and Alvarezsaurus ( Chiappe et al. 2002) . In Parvicursor , the transverse processes have been interpreted as anterolaterally oriented ( Karhu and Rautian 1996). The long axis of the cross section of each transverse process remains clearly oblique (oriented anterodorsally−posteroventrally) as far back as C9, but becomes nearly horizontal in C10–13. The prezygapophyseal processes retain a strong dorsal orientation throughout the series, and the articular facets of both the pre− and postzygapophyses are steeply inclined throughout the caudal sequence. The prezygapophyseal processes become shorter in the posterior caudals, but extend beyond the intercentral articulation even in C12, the last caudal vertebra in which prezygapophyses are preserved. The postzygapophyses assume a more posterior location in the posterior caudal vertebrae, projecting just beyond the intercentral articular surface in C13. The neural spines of C4–13 are posteriorly positioned, occurring at the level of the postzygapophyses as in C2 and C3. Passing posteriorly along the series, the neural spines become lower dorsoventrally but longer anteroposteriorly. In C13 the neural spine is still visible in the form of a sharp, low ridge, and extends over about two−thirds of the total length of the centrum. The posterior margin of the neural spine of C13 is much thicker transversely than the anterior margin.

A fragmentary chevron is preserved between C7 and C8. A proximal bridge connects the left and right halves of the chevron dorsal to the hemal canal, and the anterior margin of the proximal end is slightly bifurcated. The distal portion of the chevron is broken away.

Pectoral girdle and sternum

Scapula and coracoid.—Unlike those of other alvarezsauroids, the scapula and coracoid of V 17608 are fused together, although the evidence for this comes exclusively from a small preserved portion of the left scapulocoracoid ( Fig. 7A ). The preserved scapulocoracoid is reminiscent of the scapula and coracoid of basal alvarezsauroids (Choiniere 2010; Choiniere et al. 2010), rather than those of other parvicursorines ( Chiappe et al. 2002), in having a weakly developed glenoid lip that protrudes only slightly beyond the ventral edge of the scapular blade. In most other parvicursorines ( Chiappe et al. 2002), the glenoid lip is much more prominent. The small preserved portion of the acromion process suggests an abrupt dorsal expansion of the scapular blade. The glenoid fossa faces posteroventrally as in other alvarezsauroids ( Chiappe et al. 2002; Choiniere et al. 2010). The part of the scapular blade adjacent to the glenoid is convex laterally and flat medially, with a thick, somewhat rounded ventral margin and a transversely narrow dorsal margin that bears a sharp longitudinal ridge. The broken surface of the scapular blade reveals a hollow interior, though this is possibly due to erosion. The coracoid is represented only by a small piece of bone fused to the scapula in the glenoid region, and little can be said about its morphology.

Sternum.—The sternum is a single, fused element lacking any trace of a midline suture ( Fig. 7B 1 , B 2 ). It appears to be almost complete, though its left margin is slightly broken. In general form it is a small, stout, bone, tapering to a broad posterior point. The sternum is only slightly anteroposteriorly longer than it is transversely wide, whereas in other Asian parvicursorines this element is considerably longer than wide ( Perle et al. 1994; Chiappe et al. 2002). The dorsal surface of the sternum is transversely concave, a feature also seen in other Asian alvarezsaurids ( Perle et al. 1994; Chiappe et al. 2002). The ventral surface of the sternum is pitted, and bears a moderately developed carina (sternal keel) that bifurcates anteriorly into two lateral crests enclosing a median groove. This region is slightly eroded in IVPP V 17608, so that the degree of development of the crests and groove cannot be fully determined. The carina is much weaker than in other parvicursorines ( Perle et al. 1994; Chiappe et al. 2002), representing little more than a sharp line of inflection between the right and left halves of the sternum. The maximum depth along the midline of the sternum is less than 30% of the maximum width of the sternum, whereas the two measurements are subequal in other parvicursorines. The medial groove is, however, proportionally longer than in other parvicursorines ( Perle et al. 1994; Chiappe et al. 2002). The anterior margin of the sternum is convex, without a midline indentation as seen in Mononykus ( Perle et al. 1994) . As in Shuvuuia and Mononykus ( Perle et al. 1994; Chiappe et al. 2002), the sternum lacks facets for rib articulation. If ossified sternal ribs were present, they evidently left no impressions on the bony sternum.

Forelimb

Humerus.—Only the distal end of a right humerus is preserved ( Fig. 8A 1 –A 3 ). However, it is clear that the distal end curves anteriorly relative to the shaft in lateral view, a feature also seen in Mononykus and a variety of other theropods including more primitive tetanurans such as Baryonyx . The shaft is truncated at a point 7 mm from the distal end, revealing a sub−oval cross section. A large condyle occupies the whole medial side of the distal end, so that there is no distinct entepicondyle of the kind present in Patagonykus ( Novas 1997) . The distal condyle projects mainly anteriorly and is subtriangular in anterior view as in Mononykus ( Perle et al. 1994) , although in Mononykus the condyle extends further proximally than in Linhenykus . The articular surface of the distal condyle appears to continue a long way onto the distal surface of the humerus. Proximal to the distal condyle, the shaft of the humerus is relatively flat. The condyle is also anteriorly prominent close to the medial side of the humerus, and is sub−triangular in outline in distal view. On the distal surface of the humerus, the condyle’s lateral border is defined by an oblique crest that projects further distally than the main part of the condyle. In distal view, a small posterior notch separates the crest from the anteroposteriorly expanded main body of the condyle, as in Mononykus ( Perle et al. 1994) . The posterior surface of the distal end is only slightly concave, a condition intermediate between those seen in other Asian alvarezsaurids and in Patagonykus ( Chiappe et al. 2002) .

Ulna.—A long bone fragment is tentatively identified as the distal end of the left ulna ( Fig. 8B 1 –B 3 ). The shaft, broken through approximately 10 mm from the distal end, is sub−circular in cross section. In anterior or posterior view, the shaft curves medially. The shaft expands anteroposteriorly toward the distal end, close to which is a shallow fossa on the medial surface. As in other alvarezsaurids ( Chiappe et al. 2002), the distal end bears a large carpal trochlea, on the posteromedial corner of which is a distinct, triangular articular facet that extends further proximally on the medial surface than does the main part of the trochlea. In contrast to other alvarezsaurids ( Chiappe et al. 2002), there appears to be an indentation in

http://dx.doi.org/10.4202/app.2011.0083

the middle of the distal trochlear surface, between more prominent anterior and posterior areas.

Manus.—The preserved manual elements ( Fig. 9 ) include the left radiale, left metacarpals II and III, left digit II, incomplete right metacarpal II, incomplete right phalanx II−1 and complete right phalanx II−2. Note here we refer to the digits of the tetanuran hand as II−IV ( Kundrát et al. 2002, Xu et al. 2009), rather than as I–III as preferred by many previous workers ( Gauthier 1986; Chatterjee 1998; Wagner and Gauthier 1999; Vargas and Fallon 2005; Vargas et al. 2008; Tamura et al. 2011). All of the elements belonging to the left manus and carpus appear to have weathered out of a single nodule, in which they were preserved close to a state of natural articulation.

The left radiale is a small, ovoid bone, with a maximum diameter of about 2 mm. No unfused proximal carpal elements have previously been reported in any alvarezsaurid ( Chiappe et al. 2002). What appears to be the proximoventral surface of the radiale bears a distinct fossa. A separate “semilunate” carpal is absent, but is probably fused to metacarpal II as suggested by previous studies ( Chiappe et al. 2002; Choiniere 2010; Choiniere et al. 2010). This inference is supported by the close topological resemblance between the middle part of the proximal articular surface of the main carpometacarpal element (formed by metacarpal II and the “semilunate” carpal in Linhenykus ), which is transversely trochleated and strongly convex in dorsal or ventral view, and the corresponding surface of the “semilunate” carpal in many less specialized tetanurans ( Chure 2001). However, there is no visible suture between the “semilunate” carpal and metacarpal II, suggesting that fusion occurred very early in ontogeny.

The main carpometacarpal element is proximodistally short, mediolaterally broad, dorsoventrally shallow, and subpentagonal in dorsal or ventral outline. It is proportionally much narrower transversely than its counterpart in Mononykus (length/width ratio about 0.80 in Linhenykus , compared to about 0.60 in Mononykus ). Three articular facets are present on the proximal surface of the main carpometacarpal element. The middle and lateral facets appear to correspond to the “medial facet” and “central facet” of Chiappe et al. (2002), a terminology we adopt here (the lateral facet defined by Chiappe et al. [2002] is formed exclusively by metacarpal IV, which is probably absent in Linhenykus ). However, a distinctive accessory facet is present medial to the medial facet in IVPP V 17608, and an equivalent surface is also present in Mononykus but was not separately considered by Chiappe et al. (2002). We refer to this facet as the “accessory medial facet”. The accessory medial facet comprises a relatively deep fossa and faces more medially than proximally. It is separated from the medial facet by a dorsoventral constriction of the proximal surface of the main carpometacarpal element. The medial facet is a transversely grooved, elongate trochlea in proximal view, and represents the area that corresponds to the proximal surface of the ancestral semilunate carpal. This trochlear structure is obliquely oriented, tilting in a ventromedial−dorsolateral direction so that the groove extends slightly onto the dorsal surface of the main carpometacarpal element. In dorsal view, the medial facet is proximally convex. As in Mononykus , the proximal articular surface is dorsoventrally constricted between the medial and central facets ( Perle et al. 1994). The central facet is a large, distinct fossa. Interestingly, despite the almost identical morphology of the proximal articular surface of the main carpometacarpal in Linhenykus and Mononykus , this concave central facet has a straight dorsal border and a convex ventral border in Linhenykus , while the opposite is true in Mononykus ( Perle et al. 1994) .

The distal end of metacarpal II bears two prominent condyles separated by a broad, well−developed groove. Collateral ligamental fossae are absent, as in other alvarezsaurids including Patagonykus ( Novas 1997) . The medial condyle of the distal end is more dorsally prominent than the lateral condyle. However, the lateral condyle extends significantly more distally than the lateral one as in Haplocheirus , Patagonykus , and many other non−avian theropods (Choiniere 2010; Choiniere et al. 2010), whereas in Mononykus the distal condyles are approximately equal in size ( Chiappe et al. 2002). The medial condyle is obliquely oriented and its dorsal surface is transversely narrow. The lateral condyle has limited dorsal exposure and is transversely broad. This condyle is located at the lateral edge of the bone, so that there is no accessory process situated proximolateral to it as in Mononykus ( Perle et al. 1994) . The entire lateral surface of metacarpal II forms a sharply defined, flat articular facet for metacarpal III, as in Mononykus and Shuvuuia ( Perle et al. 1994; Chiappe et al. 2002).

Metacarpal III is completely preserved but is not incorporated into the main carpometacarpal block as in Mononykus ( Perle et al. 1994) . Metacarpal III is much shorter and more slender than metacarpal II. Its proximal articular surface is sub−triangular in outline, predominantly convex and tilted to face somewhat laterally. The ventromedial corner of the proximal surface bears a small depression that probably contributes to the lateral portion of the central facet described above. Most of the shaft of metacarpal III is sub−triangular in cross section. The dorsal margin is sharply ridged along its entire length. The distal end of metacarpal III is strongly compressed transversely, so that the distal end is a plate−like structure with a considerable ventral expansion. The distal end is sharply truncated in lateral view. The dramatic reduction of the distal articular surface to a thin, vertical edge suggests that no phalanges are associated with this digit. In contrast, Mononykus and Shuvuuia have well−defined condylar distal articulations on the third and fourth metacarpals ( Perle et al. 1994; Chiappe et al. 2002), which are fused to metacarpal II and distal carpals to form the carpometacarpus. In Shuvuuia , a complete set of manual digits III and IV are known ( Suzuki et al. 2002). These data suggest that Mononykus has phalanges on digits III and IV that were not preserved in the holotype.

Manual phalanx II−1 is a large, robust element approximately equal in thickness to the humerus. It has a maximum length/width ratio of about 2.4, compared to a value of 1.5 for the equivalent bone in Mononykus ( Perle et al. 1994; Chiappe et al. 2002). Phalanx II−1 is expanded transversely at the proximal end, particularly in the lateral direction. The maximum width/depth ratio is about 1.1, and a moderately developed dorsal process projects from the dorsolateral corner of the proximal articulation. There is also a corresponding, dorsally directed medial process, separated from the lateral one by an intervening depression. The ventral surface of the phalanx bears ridges that extend along the medial and lateral borders. The lateral ridge is much sharper than the medial one, and the two are separated by a broad axial furrow, a feature unique to alvarezsauroids ( Novas 1996; Choiniere 2010; Choiniere et al. 2010). The dorsal surface is narrowest at its distal end, in contrast to the transversely widened distal articular surface seen in Mononykus ( Perle et al. 1994) . However, in Linhenykus the ventral part of the distal articulation is considerably wider than the dorsal part. The distal articulation is strongly ginglymoid, with two distinct hemicondyles. Both hemicondyles are narrow transversely and project further ventrally than dorsally, but the medial hemicondyle is narrower than the lateral one. Collateral ligamental fossae are present on both sides. Both are large and shallow, and the lateral fossa is relatively dorsal in position. The distal articular surface extends well onto the dorsal surface of the phalanx, and a distinct extensor fossa is present immediately proximal to the distal articulation. A poorly developed flexor fossa is seen on the ventral surface of the element.

Manual ungual phalanx II−2 is the longest manual element, but is nevertheless proportionally smaller than in other parvi−

http://dx.doi.org/10.4202/app.2011.0083

cursorines ( Chiappe et al. 2002; Suzuki et al. 2002). It is less than 1.2 times as long as phalanx II−1, but in Mononykus the ungual is nearly twice the length of the proximal phalanx ( Perle et al. 1994). In Linhenykus , phalanx II−2 is robust, and has a stronger curvature than in Mononykus ( Perle et al. 1994) , assuming the proximal articular surface is oriented vertically in both taxa. The transversely broad proximal articular surface is divided into two nearly equal facets by a prominent vertical median ridge. A flexor tubercle is absent, as in all alvarezsaurids in which phalanx II−2 is known ( Novas 1996; Longrich and Currie 2008). Instead, the ventral surface is flattened and a distinct but very shallow fossa is present on the ventral surface at a level just distal to the proximal ends of the grooves for the keratinous sheath. From this fossa, a shallow, short and narrow groove extends along the midline of the ventral surface. The lateral and medial sheath grooves are proximally deep and curve ventrally at their proximal ends, each forming a distinct notch in the margin of the proximal part of the ventral surface. These notches are homologous to the closed foramina seen on the ventral surface of phalanx II− 2 in Mononykus and Shuvuuia ( Longrich and Currie 2009) .

Pelvic girdle

Ilium.—The ilium is represented only by the middle part of the left element, including part of the preacetabular process and almost all of the pubic peduncle ( Fig. 10A 1 –A 3 ). The preacetabular process is nearly vertical in orientation, but part of the iliac blade located dorsal to the pubic peduncle is inclined so that the lateral surface of the blade also faces somewhat dorsally as in other parvicursorines ( Xu et al. 2010). In lateral view, the supraacetabular crest extends anteriorly to the level of the pubic peduncle and overhangs the acetabular fossa. The crest is more prominent anteriorly than posteriorly, as in Mononykus ( Perle et al. 1994, Longrich and Currie 2009). In ventral view, the supraacetabular crest recedes into the anteroventrally−oriented pubic peduncle, which is more ventral and less anterior than is the case in Mononykus ( Perle et al. 1994) . The peduncle is greatly elongated anteroposteriorly and narrow mediolaterally, appearing almost ridge−like in ventral view. A cuppedicus fossa is absent as in other alvarezsaurids ( Xu et al. 2010).

Pubis.—Only the proximal part of the left pubis is present ( Fig. 10B ). As in other alvarezsaurids ( Hutchinson and Chiappe 1998), this part of the bone is strongly laterally compressed. In contrast to other parvicursorines ( Hutchinson and Chiappe 1998), the proximal articular surface is subtriangular in outline rather than kidney−shaped, but this morphology results at least partly from damage to the anteromedial part of the proximal surface. The articular surface for the ilium appears to be concave, and is much longer than wide. It seems more proximally (as opposed to proximoposteriorly) oriented than is the case in Mononykus and Patagonykus ( Perle et al. 1994; Novas 1997). Its lateral margin is not concave, in contrast to other parvicursorines ( Hutchinson and Chiappe 1998). The acetabular fossa of the pubis is slightly inclined ventrolaterally. Its posterolateral corner is built out into a distinct, laterally expanded process. Anteriorly, the pubis differs from those of other parvicursorines in lacking a preacetabular tubercle ( Hutchinson and Chiappe 1998). The pubic ischial peduncle is proximodistally long but mediolaterally very thin. The dorsal part of the articular surface for the ischium is transversely wide and markedly concave, whereas the ventral part is strongly compressed and slightly convex. The lateral surface of the proximal part of the pubis is flattened, and overhung by the laterally expanded process at the posterolateral corner of the acetabular fossa. Although there are some morphological differences between the pubis of Linhenykus and that of other parvicursorines, the close resemblance of the element in Linhenykus and other parvicursorines suggests that Linhenykus also had strong opisthopuby as in other parvicursorines ( Chiappe et al. 2002).

Hindlimb

Femur.—Both femora are preserved, but neither is complete ( Fig. 11A 1 –A 6 , B 1 –B 3 ). The femur is estimated to be slightly more than 70 mm long. A well−developed trochanteric crest appears to be present, but the part of the crest formed by the lesser trochanter is missing. Consequently it is uncertain whether the greater and lesser trochanters are completely fused to each other without any intervening notch, as in other parvicursorines ( Chiappe et al. 2002). The femoral head is medially directed and is perpendicular to both the femoral shaft and the trochanteric crest. The femoral head differs from that of Mononykus in being proportionally more stout, and in being separated from the shaft by a slight neck. As in Mononykus ( Chiappe et al. 2002) , however, the femoral head and trochanteric crest give the proximal end of the femur an L−shaped outline. The proximolateral margin of the femur is smooth and slightly concave, without any trace of a posterior trochanter. The femoral shaft is bowed anteriorly. Three ridges originate from the proximal end, extending along the posterolateral, posteromedial, and anteromedial edges of the

http://dx.doi.org/10.4202/app.2011.0083

femoral shaft. The posterolateral ridge is sharp and extends for more than half of the femoral length, whereas the posteromedial ridge is the weakest of the three. The anteromedial ridge is the most prominent but also the shortest, and its distal end curves posteriorly onto the medial surface of the femur. Lateral to the distal part of the posteromedial ridge lies a distinct 3 mm groove, containing an elongated foramen that is probably homologous to a similarly positioned foramen in Mononykus ( Perle et al. 1994) . No fourth trochanter is present in Linhenykus or Parvicursor , whereas an incipient fourth trochanter is present in a juvenile specimen of Shuvuuia and a weak fourth trochanter is present in all other alvarezsaurids in which the proximal femoral shaft is preserved ( Chiappe et al. 2002; Xu et al. 2010). Posterior and parallel to the anteromedial ridge is a long, wide, and shallow groove. The distal part of this groove widens slightly to form a small fossa. The mediolateral width of the femur increases considerably toward the distal end of the bone. The anterior surface near the distal end is transversely convex over its lateral half and slightly concave over its medial half. The posterior surface of the distal end of the femur forms a large, wide popliteal fossa, bordered on either side by medial and lateral ridges that extend to the distal condyles. The medial ridge is sharper than the lateral. Unlike in Mononykus , but resembling the condition seen in Parvicursor and Patagonykus ( Chiappe et al. 2002) , the popliteal fossa is widely open distally. In Xixianykus , the popliteal fossa is partially open distally ( Xu et al. 2010). The medial condyle is transversely narrow in distal view and sub−triangular in posterior view. The lateral condyle has three projections: an ectocondylar tuber projecting posteriorly, a weak cone−shaped distal projection (present in all alvarezsauroids), and a weak, ridge−like lateral projection oriented almost anteroposteriorly, possibly an apomorphic feature for Linhenykus .

Tibia.—Both tibiae are almost completely preserved ( Fig. 11C, D ). The tibia is about 1.4 times as long as the femur. The proximal end appears to be sub−trapezoidal in proximal view, and is estimated to be only slightly longer anteroposteriorly than transversely. The proximal articular surface is inclined anterolaterally. The cnemial crest extends distally along the tibial shaft for about 14 mm. The fibular condyle is anteroposteriorly long and appears to bear an accessory crest anteriorly, unlike the condition in other parvicursorines ( Chiappe et al. 2002; Xu et al. 2010). As in Mononykus and Parvicursor ( Chiappe et al. 2002) , the medial side of the posterior condyle forms a proximally directed eminence. The fibular and posterior condyles are separated from each other by a relatively deep posterior notch. A fossa is present on the tibial shaft just distal to the notch between the two condyles, and is partly overhung by them. The 18 mm long fibular crest is narrowly separated from the fibular condyle by a 3 mm gap. The crest is sharp, and recedes at both ends. A shallow groove with a distinctly deepened distal end lies posterior and parallel to the fibular crest on the lateral surface of the tibial shaft. The tibial shaft is sub−circular in cross section in the midshaft region. A 20 mm long weak ridge arises near the midpoint of the tibia’s length and runs close to the medial edge of the anterior surface. The distal part of the tibial shaft has a flat posterior surface, whereas the anterior surface has a slight transverse concavity to accommodate the ascending process of the astragalus. A short, distomedially directed crest is present along the distalmost part of the anteromedial margin of the tibia, and a long, sharp ridge separates the anterior and lateral surfaces of the distal end. The lateral portion of the distal end is relatively robust, being subequal in anteroposterior thickness to the medial portion. The distal end of the right tibia has a well−preserved lateral surface, and there is no indication that the fibula reached this part of the tibiotarsus.

Astragalus and calcaneum.—The astragalus−calcaneum complex is represented only by pieces of bone attached to the distal ends of both tibiae ( Fig. 11C 1, D 1 , E). The astragalus−calcaneum complex is tightly articulated with the tibia, and the left tibiotarsus even shows co−ossification among the three elements. The main body of the astragalus is poorly preserved in both the left and right hindlimbs. As in Mononykus ( Chiappe et al. 2002) , the laminar ascending process is approximately L−shaped in anterior view due to a strong indentation on the medial side. The ascending process arises only from the lateral half of the body of the astragalus, so that the medial edge of the ascending process is close to the midline of the tibial shaft. A shallow anterior fossa is present at the base of the ascending process.

Pes .—The preserved pedal elements include: nearly complete left metatarsus; distal end of right metatarsal IV, and other probable right metatarsal fragments; left pedal phalanges I−1 and I−2; left pedal phalanx II−1, partial II−2, and complete II−3; partial left pedal phalanges III−1 and III−3, complete III−2, and complete left pedal ungual III−4; left pedal phalanges IV−1, IV−2, IV−3, and partial IV− 4 in articulation ( Fig. 12 ).

The metatarsus is 73 mm long, and its transverse width is less than 5 mm in the midshaft region. As in other parvicursorines ( Chiappe et al. 2002; Longrich and Currie 2009; Xu et al. 2010), the metatarsus is longer than the femur, and exhibits a specialized arctometatarsalian condition in which metatarsal III terminates well distal to the proximal end of the metatarsus as in other parvicursorines ( Longrich and Currie 2009; Turner et al. 2009; Xu et al. 2010). In less specialized arctometatarsal taxa, metatarsal III normally extends right to the proximal end of the metatarsus in an attenuated form ( Hutchinson and Padian 1997).

Metatarsal II is straight for most of its length, although the proximal and distal ends both have a strong medial curvature. The proximal end of metatarsal II appears to have a sub−triangular outline, though its lateral portion is missing in the only preserved example of ths element. Relative to the midshaft, the proximal end is strongly expanded both dorsally and laterally. Just 7 mm away from the proximal end is a short groove along the dorsomedial margin. The shaft is deeper dorsoventrally than wide transversely for its entire length, although the discrepancy is reduced in the distal third of the shaft. A weak crest is present along the ventromedial median ridge margin over about the middle third of the shaft. A slight collateral ligamental pit appears to be present on the medial side of the distal end of the metatarsal.

Metatarsal III is visible over about the distal two−fifths of the metatarsus in dorsal view and over less than the distal one−fifth in ventral view. Proximally, this metatarsal is wedge−shaped, fitting tightly between metatarsals II and IV. From the sharply pointed proximal end of metatarsal III, the dorsal surface of the shaft rapidly widens and indeed becomes broader than the other metatarsals in dorsal view, but subsequently undergoes a slight constriction and remains narrow for approximately the distal three−fifths of its length. The dorsal surface proximal to the constriction is slightly concave transversely, a feature also seen in other Asian parvicursorines ( Longrich and Currie 2009). Ventrally the shaft forms a weak longitudinal ridge extending toward the distal end. As preserved, the distal portion of metatarsal III curves considerably ventrally, as does that of metatarsal IV. The distal end is considerably wider transversely than those of metatarsals II and IV. The articular surface is not ginglymoid, though oblique hemicondylar ridges are weakly developed on the ventral surface. The distal articular surface extends some distance proximally onto the dorsal surface of the shaft. Large and deep collateral ligmental fossae are present on the medial and lateral sides of the distal end of the metatarsal.

Metatarsal IV is only slightly longer than metatarsal II and is closely appressed to the latter for most of its length, although in the distalmost part of the metatarsus the two are separated by metatarsal III. Metatarsal IV is much deeper dorsoventrally than wide transversely for most of its length, and its distal end appears to curve laterally. Metatarsal IV is transversely wider than metatarsal II over the proximal half of the metatarsus, but narrower over the distal half. A weak crest runs along the proximal half of the ventrolateral margin. The distal end of metatarsal IV is slightly expanded dorsally and strongly expanded ventrally. The distal articulation is non−ginglymoid. The dorsal exposure of the articular surface is strongly skewed towards the lateral side of the metatarsal. On the ventral surface of the distal end two prominent ridge−like hemicondyles are developed, the lateral hemicondyle being more ventrally prominent than the medial. There is no collateral ligamental pit on the lateral side of the distal end of the metatarsal.

The pedal phalanges are relatively long and slender compared to those of Mononykus ( Perle et al. 1994) . All of the non−ungual phalanges are sub−rectangular in cross section, and have strongly ginglymoid distal ends with hemicondyles

http://dx.doi.org/10.4202/app.2011.0083

that are of considerable extent both dorsoventrally and proximodistally. Collateral ligamental fossae are well developed on most of the non−ungual phalanges, although the pits on the penultimate phalanges are shallow. The proximal phalanges have distinct extensor fossae immediately proximal to their distal articular surfaces, and less distinct fossae are also present on the intermediate phalanges.

Pedal phalanx I−1 is small. Its proximal articular surface is nearly flat and inclined to face slightly dorsally. The dorsal and ventral margins do not form prominent lips, suggesting that the distal end of metatarsal I is non−ginglymoid. The distal hemicondyles of phalanx I−1 are more prominent dorsally than ventrally, and the medial hemicondyle is larger than the lateral. A shallow collateral ligamental fossa is located ventrally on the medial surface of the distal articulation, whereas the lateral surface is flat. Phalanx II−1 is much deeper dorsoventrally at the proximal end than at the distal end. Distally the phalanx bears not only a distinct extensor fossa, but also a prominent flexor fossa bounded laterally and medially by significant proximal extensions of the hemicondyles. The ventral lip of the proximal end of phalanx II−2 is asymmetrical, with its tip medially positioned. Phalanx III−1 has a strongly expanded proximal end, but the shaft narrows significantly as it passes distally. Phalanx IV−1 is a relatively robust element. Its proximal end is deeply notched on the ventral side, with a long and robust medial process and a short, transversely thin lateral process, as in other parvicursorines ( Longrich and Currie 2009). The lateral collateral ligamental fossa is shallow and located centrally on the lateral surface of the distal end of the phalanx, whereas the medial fossa appears deep.

The pedal ungual phalanges are moderately curved and laterally compressed, each having a sub−elliptical cross section. The preserved examples all lack flexor tubercles, and their arcuate sheath grooves are relatively weak. Phalanx I−2 is asymmetrical, having a relatively flat lateral margin but a more convex medial margin.

Stratigraphic and geographic range.— Type locality only.

Figures

Fig. 1. Alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holo− type (IVPP V17608). Skeletal silhouette showing preserved bones (missing portions shown in grey).

Fig. 2. Cervical vertebrae of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). Two posterior cervical vertebrae in right lateral (A), left lateral (B), ventral (C), and dorsal (D) views.

Fig. 3.Dorsal vertebrae of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Middle dorsal vertebra in left lateral (A1), right lateral (A2), posterior (A3), ventral (A4), and dorsal (A5) views. B. Two posterior dorsal vertebrae in lateral (B1) and ventral (B2) views.

Fig. 4.Sacral vertebrae of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Presumed fourth and fifth last sacral vertebrae in left lateral (A1), right lateral (A2), ventral (A3), and dorsal (A4) views. B. Presumed third and fourth last sacral vertebrae in right lateral (B1), left lateral (B2), and dorsal (B3) view. C. Presumed second last sacral vertebra in right lateral (C1), anterior (C2), posterior (C3), and ventral (C4) views.

Fig. 5.Caudal vertebrae 1–3 of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Caudal vertebra 1 in left lateral (A1) and right lateral (A2) views. B. Caudal vertebrae 2 and 3 in anterior (B1), left lateral (B2), right lateral (B3), ventral (B4), and dorsal (B5) views.

Fig. 6.Caudal vertebrae 4–13 of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Vertebrae 4–6 in left lateral (A1), right lateral (A2), ventral (A3), and dorsal (A4) views. B. Vertebra 7 in ventrolateral (B1), dorsolateral (B2), ventral (B3), and posterior (B4) views. C. Vertebrae 8 and 9 in left lateral (C1), right lateral (C2), ventral (C3), and dorsal (C4) view. D. Vertebrae 10–12 in right lateral (D1), left lateral (D2), and ventral (D3) views. E. Vertebra 13 in right lateral (E1), left lateral (E2), ventral (E3), anterior (E4), and posterior (E5) views.

Fig. 7. Left scapulocoracoid and sternum of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Left scapulocoracoid in lateral view. B. Sternum in ventral (B1) and anterior (B2) views.

Fig. 8. Right humerus and left ulna of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Right humerus in anterior (A1), posterior (A2), and medial (A3) views. B.?left ulna in anterior (B1), lateral (B2), and posterior (B3) views. Scale bars 5 mm.

Fig. 9. Manus of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Right manus in dorsal (A1) and dorsolateral (A2) views. B. Right main carpometacarpal element in dorsal (B1), ventral (B2), proximal (B3), medial (B4), lateral (B5), and distal (B6) views. C. Left main carpometacarpal element in dorsal (C1), proximal (C2), and distal (C3) views. D. Metacarpal III in lateral (D1) and medial (D2) views. E. Right manual phalanx II−1 in ventral view. F. Left manual phalanx II−2 in lateral (F1), proximal (F2), and ventral (F3) views.

Fig. 10. Pelvic elements of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Left ilium in lateral (A1), dorsal (A2), and ventral (A3) views. B. Left pubis in lateral view.

Fig. 11. Femora and tibiotarsi of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Right femur in proximal (A1), anterior (A2), posterior (A3), lateral (A4), medial (A5), and distal (A6) views. B. Left femur in anterior (B1), posterior (B2), and lateral (B3) views. C. Left tibiotarsus in anterior (C1), posterior (C2), medial (C3), and lateral (C4) views.D. Right tibiotarsus in anterior (D1), posterior (D2), and medial (D3) views.E. Left astragalus in anterior view.

Fig. 12. Pes of an alvarezsauroid theropod Linhenykus monodactylus Xu, Sullivan, Pittman, Choiniere, Hone, Upchurch, Tan, Xiao, Tan, and Han, 2011a, Bayan Mandahu (“Gate Locality”), Late Cretaceous (Campanian), holotype (IVPP V17608). A. Left metatarsus in dorsal (A1), ventral (A2), medial (A3), and lateral (A4) views. B. Left pedal phalanges I−1 and I−2 in right (B1) and left (B2) lateral views. C.?right pedal phalanges II−1, II−2, and II−3 in lateral (C1), dorsal (C2), ventral (C3) views. D.?left pedal phalanges IV−3, IV−4, and IV−5 in dorsal (D1), ventral (D2), and lateral (D3) views. E.?right pedal phalanx IV−4 in proximal (E1), dorsal (E2), lateral (E3), medial (E4), and distal (E5) views. F.?left pedal phalanges III−3 and III−4 in lateral view.