Leptopsyllus (Leptopsyllus) pundius, Back, Jinwook & Lee, Wonchoel, 2017
publication ID |
https://dx.doi.org/10.3897/zookeys.665.6150 |
publication LSID |
lsid:zoobank.org:pub:574FD12F-ED4A-41ED-8389-F24564971F37 |
persistent identifier |
https://treatment.plazi.org/id/D56A6D69-3919-4719-899A-889C1023E935 |
taxon LSID |
lsid:zoobank.org:act:D56A6D69-3919-4719-899A-889C1023E935 |
treatment provided by |
|
scientific name |
Leptopsyllus (Leptopsyllus) pundius |
status |
sp. n. |
Leptopsyllus (Leptopsyllus) pundius View in CoL sp. n. Figs 1, 2, 3, 4
Type locality.
Republic of Korea, Pung Island (Korean name Pungdo): subtidal zone, 37°5'21.46"N, 126°24'27.10"E (depth: 30 m, sand).
Materials examined.
Holotype 1♀ (MABIK CR00235287) dissected on four slides. Sampled by a grab on a fishing boat on 16 Feb 2008.
Diagnosis.
Description of female. Total body length 390 µm (Fig. 1A); largest width measured at posterior margin of cephalic shield: 67 µm; body cylindrical, slightly depressed dorsoventrally; urosome gradually tapering posteriorly; whole body very hyaline. Rostrum triangular, fused with cephalic shield; with 2 small sensilla. Cephalothorax bell-shaped; pleural areas weakly developed and posterolateral angles rounded; posterior margin smooth, without distinct hyaline frill.
Genital field located mid-ventrally halfway the length of the genital double-somite; copulatory pore located near posterior border of genital field and covered by small process (Fig. 2D); P6 represented by transverse plate with 1 bare seta (Fig. 2D); penultimate somite with well-developed pseudoperculum; anal operculum not developed.
CR (Fig. 1C). Parallel, about 2.7-3.0-times as long as greatest width, conical, distal margin blunt; each ramus armed with 6 setae (seta I not observed and probably vestigial); seta II bare; setae III stout, bearing spinule-like elements; seta IV pinnate; seta V pinnate, longest; seta VI shortest and pinnate; seta VII bi-articulate at base and arising from inner dorsal surface.
A1 (Fig. 2A). 8-segmented, short, robust; seg-1 longest; seg-4 sub-cylindrical process armed with long slender seta fused basally to aesthetasc; seg-6 armed with 1 slender bare seta arising from ventral sub-cylindrical process; armature formula: 1-[1 pinnate], 2-[8 bare + 1 pinnate], 3-[5 bare + 2 pinnate], 4-[2 bare + (1 + ae)], 5-[1 bare], 6-[3 bare], 7-[2 bare], 8-[5 bare + acrothek]; apical acrothek consisting of well-developed aesthetasc fused basally to 2 slender, naked setae.
A2 (Fig. 2B). 4-segmented, comprising coxa, basis, and free 2-segmented enp; coxa small and bare; basis approximately 2.2 times as long as maximum width, without any surface ornamentation; exp 1-segmented, with 2 lateral bare and 2 distal modified setae; proximal endopodal segment with 1 pinnate abexopodal seta; distal endopodal segment armed with 2 bare short spines laterally, 1 naked and 2 spine-like setae in middle of segment, 3 geniculate setae around distal margin, and 1 longest geniculate seta fused at base with 1 bare seta.
Mandible (Fig. 3A). Coxa with well-developed gnathobase bearing 1 pinnate seta at dorsal corner and 6 major spinous overlapping teeth; palp biramous, comprising basis, 1-segmented exp and 2-segmented enp; basis widening distally, with 3 bare setae; exp with 2 distal setae; enp long; enp-1 same as long as exp, with 2 bare setae; enp-2 with 5 basally fused setae at apex.
Maxillule (Fig. 3B). Praecoxal arthrite well-developed, with 6 spines, 2 pinnate setae, and 2 juxtaposed slender setae; coxa with cylindrical endite bearing 3 distal bare setae; basis cylindrical; endites fused, collectively bearing 5 distal bare setae; exp 1-segmented, small, with 2 bare setae; enp 1-segmented, with 4 bare setae distally.
Maxilla (Fig. 3C). Syncoxa with 3 cylindrical endites; praecoxal endite with 2 bare setae; proximal and distal coxal endite with 1 pinnate and 2 bare setae each; allobasis with 2 strong claws and 1 bare seta; enp 1-segmented, with 5 bare setae apically.
Maxilliped (Fig. 3D) comprising syncoxa, basis and 2-segmented enp; syncoxa without element; basis with 1 row of spinules sub-distally; enp-1 with 1 stout seta on distal margin; enp-2 with 1 bare and 2 geniculate setae.
P1 (Fig. 4A). Coxa bare; basis with 1 bare seta on proximal inner margin and 1 small bare outer seta; exp shorter than enp; exp-1 about 1.6 times longer than exp-2, with 1 pinnate seta near outer distal corner; exp-2 with 4 long bare setae distally; enp-1 unornamented, elongate, and approximately 2.3 times as long as enp-2; enp-2 small, with 2 geniculate setae apically.
P2, P3 (Fig. 4B, C). Coxa bare; basis without any surface ornamentation; outer margin with 1 bare seta; exp 3-segmented; exp-1 and -2 with 1 outer pinnate spine; exp-3 with 1 pinnate outer spine and 1 geniculate seta; enp absent.
P4 (Fig. 4D). Coxa bare; basis with 1 bare seta; exp 3-segmented; exp-1 and -2 with 1 outer spine; exp-3 with 1 outer spine and 1 geniculate seta; enp as long as exp-1, with 1 strong spine distally.
Armature formula as follows:
P5 (Fig. 2C) with medially fused baseoendopods and discrete exps; baseoendopod with 1 basal seta; endopodal lobes elongate, closely pressed to each other, with 2 bare apical setae each; exp small, with 3 bare setae, innermost one longest.
Description of male. Unknown.
Etymology.
The specific name refers to the type locality of the new species, Pung Island, Korea.
No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.
Kingdom |
|
Phylum |
|
Class |
|
Order |
|
Family |
|
Genus |