Lepidometopus platycephalus nov. spec. Foissner and Vďačný, 2017

Vď’Ačný, Peter & Foissner, Wilhelm, 2017, A Huge Diversity of Metopids (Ciliophora, Armophorea) in Soil from the Murray River Floodplain, Australia. II. Morphology and Morphogenesis of Lepidometopus platycephalus nov. gen., nov. spec., Acta Protozoologica 56 (1), pp. 39-57 : 41-51

publication ID

https://doi.org/ 10.4467/16890027AP.17.004.6968

DOI

https://doi.org/10.5281/zenodo.12555232

persistent identifier

https://treatment.plazi.org/id/680487A7-F310-FFC4-AED7-FF21FA9C7104

treatment provided by

Felipe

scientific name

Lepidometopus platycephalus nov. spec. Foissner and Vďačný
status

sp. nov.

Lepidometopus platycephalus nov. spec. Foissner and Vďačný

Diagnosis: Size about 45 × 20 µm in vivo. Body broadly to narrowly reniform with a somewhat rhomboid appearance when viewed ventro- or dorsolaterally. Macronucleus between anterior and posterior end of adoral zone, globular to oblong; one globular to broadly ellipsoid micronucleus. Contractile vacuole terminal. Epicortical scales about 1.25 × 0.45 µm in SEM, flat with margin curled up. On average 11 ciliary rows; caudal cilium about 20 µm long. Perizonal stripe composed of five kineties extending approximately 46% of body length and forming about 19 false kineties. Adoral zone extends about 50% of body length, composed of an average of 11 polykinetids.

Type locality: Loamy soil and leaf litter from the floodplain of the Murray River near to the town of Albury, Australia (S36°06' E146°54') GoogleMaps .

Type material: The holotype slide and eight paratype slides with protargol-impregnated specimens have been deposited in the Museum of Natural History (Biologiezentrum) in Linz (LI), Austria. The holotype ( Fig. 2K, L View Fig ) and relevant paratype specimens as well as dividers have been marked by black ink circles on the coverslip.

Etymology: Derived from the Ancient Greek adjective platús (πλατύς, flat) and the Ancient Greek noun képhalos (κέφ ᾰ λΟς [m], head), referring to the strongly flattened preoral dome. The composite name is latinized and treated as a noun in the nominative singular standing in apposition to the generic name [Art. 11.9.1.2 of the International Commission on Zoological Nomenclature (1999)].

Description: Size in vivo 35–50 × 15–30 µm, usually about 45 × 20 µm, as calculated from some in vivo measurements and the morphometric data adding 15% preparation shrinkage ( Table 1 View Table 1 ). Body asymmetric and thus multi-shaped: broadly to narrowly reniform in ventro- and dorsolateral views ( Figs 2A, G, K–V View Fig , 3A, B View Fig , 4C, D View Fig ), broadly crescentic in lateral views ( Figs 2F, H View Fig , 4B, E View Fig , 5B View Fig ), and dumbbell-shaped in ventrocaudal views ( Figs 2I View Fig , 5C View Fig ); body ends somewhat angular providing cells with a rhomboid or triangular appearance, depending on observation perspective; distal portion of preoral dome strongly flattened and thus hyaline, only 2–3 µm thick in vivo ( Fig. 3A–C View Fig , asterisks), projects distinctly in lateral views, forming a right or nearly right angle with main body axis ( Fig. 4B, E View Fig , opposed arrowheads); postoral body portion unflattened and usually distinctly vaulted ( Figs 4A–E View Fig , 5B, C View Fig ). Localization of nuclear apparatus very stable, i.e., between anterior and posterior end of adoral zone and left of cell’s midline. Macronucleus broadly ellipsoid (52.4%), ellipsoid (23.8%), narrowly ellipsoid (9.5%) or globular (14.3%), i.e., length:width ratio 1.0–5.0:1, size about 8–20 × 4–9 µm, usually 12 × 7 µm in protargol preparations; nucleoli 0.5–1 µm across. Micronucleus usually attached to anterior portion of right margin of macronucleus; shape and size rather stable, i.e., globular to broadly ellipsoid and 2–3 µm in diameter after protargol impregnation ( Figs 2A, K, J, M, O–V View Fig , 3C, E–H View Fig ; Table 1 View Table 1 ). Contractile vacuole in posterior body end, globular to ellipsoid during diastole ( Figs 2A, K, O–Q, S–V View Fig , 3A, B, D View Fig ). Cortex flexible, covered by epicortical scales (lepidosomes) usually forming a 1–2 µm, rarely an up to 4 µm thick layer with slimy or fibro-granular appearance in vivo ( Fig. 3A, C, D View Fig , opposed arrowheads) and flake-like appearance in SEM ( Figs 4H View Fig , 5A View Fig ), not recognizable in protargol or silver carbonate preparations. Individual lepidosomes with irregular shape, flat with margin curled up, rather variable in size, viz., 0.50–1.65 × 0.20– 0.80 µm, on average 1.25 × 0.45 µm in SEM ( Figs 2E View Fig , 4H View Fig , 5A View Fig ). No cortical granules recognizable. Cytoplasm colourless, contains many 3–6 µm-sized food vacuoles with bacterial spores; symbiotic bacteria neither detected in vivo nor in protargol preparations ( Fig. 3A View Fig ). Creeps slowly and ungainly on microscope slides, rotates slowly about main body axis when swimming.

Somatic ciliature composed of dikinetids, anterior cilium lacking in postoral kinetids ( Fig. 4I View Fig ) except for those extending along left body margin, an unusual feature observed in vivo, after protargol impregnation, and confirmed in SEM ( Figs 2A View Fig , 3C View Fig , 4B–D View Fig , arrows, J). Somatic cilia comparatively widely spaced, rather rigid, in vivo 10–12 µm long in mid-body, up to 13 µm on rear body end; a single elongated caudal cilium with filiform distal end, 16–30 µm long, usually about 20 µm long in vivo, fragile and thus usually missing in prepared specimens ( Figs 2A View Fig , 3A, D View Fig ). On average 11 equidistant and ordinarily spaced ciliary rows, i.e., interkinetal distance about 5–6 µm in protargol preparations, follow body curvature ( Figs 2K–N View Fig , 3E, F View Fig ; Table 1 View Table 1 ). Perizonal stripe begins at left anterior body margin, extends along whole anterior body end, curves perpendicularly to right anterior margin, and terminates on right margin of dorsal side at or slightly anterior to level of proximal end of adoral zone, i.e., forms a Γ-shaped pattern; extends 46% of body length on average; invariably composed of five rows: first three rows more narrowly spaced than the two last rows with dikinetids slightly shifted, providing stripe with a staggered appearance. Stripe rows segmented into an average of 19 false kineties, each perizonal dikinetid with two cilia 15–18 µm long in vivo and 8–12 µm in SEM; number of perizonal rows often difficult to determine in distal portion of stripe due to their narrow spacing and strong flattening of anterior body portion, but ontogenetic data indicate that there are five rows beginning at almost same level ( Figs 2B, K–N View Fig , 3E–H View Fig , 4G View Fig ; Table 1 View Table 1 ).

Type 4 oral area. Adoral zone extends vertically to strongly obliquely and about half of body length, roofed by preoral dome, composed of an average of 11 polykinetids up to 6 µm wide; cilia 5 µm long in vivo, usually spread backwards in SEM ( Fig. 5D View Fig ); proximal- and distalmost polykinetids rectangular or somewhat irregular and composed of two to three rows of basal bodies, others L-shaped and usually composed of a short row and three long rows ( Fig. 2C View Fig ). Paroral membrane begins about 17 µm posterior to anterior body end, extends along right margin of side stripe, optically intersects adoral zone; composed of narrowly spaced, oblique ellipsoids being dikinetids according to the ontogenetic data, only one basal body ciliated according to SEM observations, cilia 3–6 µm long in SEM, form a tongue-like or fimbriate structure ( Figs 2C, L, N View Fig , 3G, H View Fig , 4F View Fig , 5D, E View Fig ; Table 1 View Table 1 ). Cytopharyngeal fibres originate from proximal end of adoral zone and paroral membrane, extend backwards forming a funnel about 15 µm long in protargol preparations ( Fig. 2L, N View Fig ). Dome lip inconspicuous because only 0.25–0.50 µm wide in SEM. Side stripe a comparatively deep, 2.3–3.3 µm wide channel in the scanning electron microscope, covered by epicortical scales ( Fig. 5D, E View Fig ).

Morphogenesis of Lepidometopus platycephalus

Division mode: Binary fission is homothetogenic and occurs in freely motile (non-encysted) condition. Body shape changes drastically. Stomatogenesis is pleurotelokinetal. The parental oral structures are reorganized but are not involved in the formation of the daughter oral ciliature.

Body changes: Early dividers are 48–55 × 23– 25 µm in size, i.e., they are slightly larger than morphostatic specimens and gradually loose the reniform and rhomboid appearance, becoming Metopus -shaped ( Fig. 6A–H View Fig ). The cell portion carrying the prospective adoral polykinetids transforms into a small bulge recognizable in lateral view ( Fig. 6E, F View Fig ). On the other hand, the parental oral area is still unchanged, i.e., the preoral dome is strongly flattened and distinctly projects from body proper ( Fig. 6C View Fig ).

In mid-dividers, the body slightly shortens and conspicuously broadens to 45–50 × 30–38 µm. These cells are thus the stoutest and shortest dividers. Body shape drastically changes: (1) the outline becomes broadly elliptic, (2) the ventral side becomes strongly inflated, and (3) the preoral dome turns into a small, rounded protuberance projecting from the left anterior body margin ( Fig. 7A–F View Fig ).

Just before separation, the daughter cells are broadly ellipsoid without any sign of a preoral dome ( Fig. 8A, B View Fig ). However, fundamental changes in cell shape and size take place after division: (1) the body intensively grows from about 33 × 23 µm to about 55 × 22 µm, (2) the anterior portion of the cell flattens, and (3) the preoral dome pulls out of the cell to roof the adoral zone by twisting leftwards taking along the perizonal stripe which thus obtains the typical Γ-shaped pattern ( Fig. 8C–H View Fig ). Nevertheless, late post-dividers are still very dissimilar from morphostatic cells. They are oblong, not or only slightly twisted anteriorly ( Fig. 8G, H View Fig ), and longer than morphostatic specimens (on average 55 × 22 µm vs. 38 × 20 µm in protargol preparations). This indicates that their further development must be associated with body shortening, possibly as a consequence of massive remodelling to a reniform/rhomboid shape.

Development of adoral zone: The formation of the opisthe’s adoral zone is associated with two concomitantly proceeding events taking place in early dividers: (1) proliferation of dikinetids (protopolykinetids) in the posterior portion of about six dorsal and dorsolateral kineties ( Fig. 6A–G View Fig , arrowheads) and (2) the production of dikinetids in the anterior portion of about three postoral kineties, i.e., slightly posterior to the proximal end of the perizonal stripe ( Fig. 6A, C, E, G View Fig , asterisks). In early mid-dividers, the newly formed dikinetids detach from the somatic ciliary rows and migrate to assemble the opisthe’s adoral zone ( Fig. 6I View Fig ). The new adoral polykinetids are thus migrating kinetofragments composed of two long rows of basal bodies. The third long row and the short row making the polykinetids L-shaped are mostly added in post-dividers ( Fig. 8C, G View Fig ).

Reorganization of the parental adoral zone begins in early mid-dividers. The polykinetids of the proter become smaller and loose the interphase L-shaped pattern, very likely due to the resorption of one long row and the short row of basal bodies ( Fig. 6I View Fig ). Taking into account that the adoral zone of proter and opisthe has a similar morphology in mid-dividers and late dividers ( Figs 7A, C, E View Fig , 8A View Fig ), the proter’s adoral zone must obtain the species-specific pattern also post-divisionally.

Development of perizonal stripe and paroral membrane: During the formation of the new adoral polykinetids, an intrakinetal proliferation of kinetids commences in the parental perizonal rows which thus elongate posteriorly into the glabrous area between the opisthe’s adoral zone and the posterior end of the split parental somatic kineties ( Fig. 6E, G, I View Fig ). In mid-dividers, the posterior portion of perizonal rows 1 and 2 disorders and the resulting dikinetids migrate along the new adoral zone to assemble the opisthe’s paroral membrane ( Fig. 7A, C, E View Fig , asterisks); perizonal rows 3–5 remain ordered and their posterior portion becomes perizonal rows 1’–3’ in the opisthe. Opisthe’s perizonal rows 4’ and 5’ are formed from the posterior half of the first two dorsolateral kineties which migrate towards perizonal rows 1’–3’ in very late mid-dividers and late dividers ( Figs 6I View Fig , 7A, C, E View Fig , arrows). The loss of these two dorsolateral kineties is compensated by the formation of one or two ciliary rows left of the opisthe’s adoral zone ( Fig. 7A, C, E View Fig , arrowheads).

In connection with body re-shaping, the parental perizonal stripe looses the Γ-shape and moves from dorsolateral to the right margin of the ventral side; the species-specific pattern is obtained post-divisionally. The parental paroral membrane is entirely disordered in mid-dividers ( Fig. 7A, C, E View Fig ) and re-assembled in late dividers ( Fig. 8A View Fig ).

Development of somatic ciliature: After formation of the prospective adoral polykinetids, an intense proliferation of basal bodies begins in all somatic ciliary rows. First, the basal bodies of the individual dikinetids go apart more or less distinctly. Then a new basal body develops in front of the anterior basal body generating a triad. Subsequently, a fourth basal body forms ahead of the posterior basal body producing a tetrad. Eventually, the tetrad splits into two pairs of dikinetids. The replication of dikinetids finishes in mid-dividers, i.e., when all somatic ciliary rows are arranged meridionally and composed of comparatively narrowly spaced dikinetids ( Fig. 7C–F View Fig ). In late dividers, the somatic ciliary rows split in the middle leaving a barren area at the posterior region of the proter and at the anterior region of the opisthe ( Fig. 8A, B View Fig , arrowheads). The somatic dikinetids are still narrowly arranged in early post-dividers ( Fig. 8C, D View Fig ). Their loose spacing is obtained gradually by growth and patterning of the body ( Fig. 8G, H View Fig ).

Nuclear division: In early dividers, the macronucleus is as in morphostatic cells, i.e., it is oblong and situated between the anterior and posterior end of the adoral zone ( Fig. 6B, D, F, H View Fig ). Later on, the macronucleus becomes larger, rounds up, and migrates to mid-body ( Fig. 6J View Fig ). In mid-dividers, the centrally located macronucleus becomes broadly fusiform and begins to divide ( Fig. 7B, D, F View Fig ). In late dividers, the macronucleus is dumbbell-shaped with a conspicuous constriction in the fission area ( Fig. 8 B View Fig ). After binary fission, the macronucleus is lenticular and pointed ( Fig. 8D View Fig ). During post-divisional growth, the macronucleus becomes oblong and moves to the species-specific interphase position ( Fig. 8F, H View Fig ).

When division commences, the micronucleus increases in size from 2.5 µm to 4.0 µm, showing fibrous structures, possibly prophasic chromosomes ( Fig. 6B View Fig ). The micronucleus further enlarges to about 6 µm and impregnates heterogeneously, which is indicative of the formation of spindle microtubules ( Fig. 6D, H, J View Fig ). Thus, the division spindle and the metaphase plate made of about eight chromosomes, become distinct already in early dividers ( Fig. 6F View Fig ). When the macronucleus becomes globular, the micronucleus begins to divide ( Fig. 7B View Fig ). The daughter micronuclei impregnate homogenously and are connected by a fiber bundle that conspicuously elongates in mid-dividers ( Fig. 7D, F View Fig ). The bundle disappears and the micronucleus achieves the species-specific size already in late dividers ( Fig. 8B View Fig ). During post-divisional patterning, the micronucleus moves to the macronucleus ( Fig. 8D, F, H View Fig ).

GBIF Dataset (for parent article) Darwin Core Archive (for parent article) View in SIBiLS Plain XML RDF