Rajathelphusa, Raj & Kumar & Ng, 2021

Raj, Smrithy, Kumar, Appukuttannair Biju & Ng, Peter K. L., 2021, Fig. 8 in Saphonecrus globosus Schweger and Tang 2015, Zoological Studies 60 (14), pp. 1-13 : 2-11

publication ID	https://doi.org/ 10.6620/ZS.2021.60-14
persistent identifier	https://treatment.plazi.org/id/5E30E924-FFFD-FFD5-04C9-B5C8FE14FD5E
treatment provided by	Felipe
scientific name	Rajathelphusa
status

Treatment

Superfamily Gecarcinucoidea, Rathbun, 1904 Family Gecarcinucidae Rathbun, 1904

Rajathelphusa gen. nov. urn:lsid:zoobank.org:act:0006A325-FA77-42A5-9290-111BAEC7CDFE

Diagnosis: Carapace high, inflated in frontal view, dorsal surface convex; epigastric cristae low but distinct, not cristate, medially separated by shallow inverted Y-shaped furrow, slightly anterior of postorbital cristae; postorbital cristae distinct, raised, not sharp, confluent with epigastric cristae, joining lateral margin as granules and interrupted striae; cervical grooves distinct, not broad, joining prominent H-shaped and branchial grooves; epibranchial tooth small, separated from external orbital tooth by small cleft, positioned above external orbital tooth in frontal view; orbits subovate, oblique in frontal view; posterior margin of epistome with distinct median triangular tooth, separated from lateral concave lobe by distinct gape; third maxilliped exopod with long flagellum that extends across width of merus; ambulatory legs slender, not elongate, merus without subdistal tooth or spine; anterior male thoracic sternum transversely narrow; sternites 1 and 2 completely fused to form triangular plate with convex lateral margins; separated from sternite 3 by shallow, median groove, otherwise fused; sternites 3 and 4 fused, demarcated by shallow oblique grooves, suture between sternites 4/5, 5/6 and 6/7 medially interrupted, separated by narrow space; suture between sternites 7/8 complete, with longitudinal groove on sternites 7 and 8, sternite 8 not visible when pleon closed; male sternopleonal cavity deep, narrow, reaching to imaginary line joining median points of cheliped coxae, distal margin on sternite 4 cristate; male pleonal-locking tubercle low, round, positioned on distal third of sternite 5; male pleon triangular, somite 6 subquadrate, telson triangular with concave lateral margins; G1 almost straight, groove for G2 ventral in position; terminal and subterminal segments clearly demarcated, terminal segment relatively short, conical, surface lined with rows of long and short setae which do not obscure surface, gradually tapering to truncate tip; G2 long, as long as G1; with long, slender distal segment, about half length of basal segment; vulvae positioned just adjacent to and pressing into the suture with sternite 5, opening membranous without sternal vulvar cover.

Type species: Rajathelphusa ala sp. nov. by present designation.

Etymology: The genus name is derived from the Rajakumari, the type locality of the type species. The word ‘Raja’ in vernacular Malayalam language means King or Prince, and ‘Kumari’ or girl is feminine gender (as opposed to ‘Kumar’ or boy who is masculine), with ‘Rajakumari’ meaning princess. The name is arbitrarily combined with the generic name ‘ Thelphusa ’. The gender of the genus is feminine.

Remarks: Rajathelphusa gen. nov. has a suite of characters that differentiates it from all the other gecarcinucid genera (see Bahir and Yeo 2007). In its high and inflated carapace, Rajathelphusa is superficially most similar to Arcithelphusa Pati & Sudha Devi, 2015 , and Cylindrotelphusa Alcock, 1909 . Two species of Arcithelphusa are known: A. cochleariformis Pati & Sudha Devi, 2015 (type species) and A. tumpikkai Pati, Sujila & Sudha Devi, 2019 , both from the Wayanad district in northern Kerala. Four species of Cylindrotelphusa have been reported from Trivandrum, Ernakulam, Thrissur, Idukki, Kollam, Kozhikode and Pathanamthitta districts in Kerala: C. breviphallus Pati, Rajesh, Raj, Sheeja, Kumar & Sureshan, 2017 , C. granulata (Pillai, 1951) , C. longiphallus Pati, Rajesh, Raj, Sheeja, Kumar & Sureshan, 2017 , and C. steniops (Alcock, 1909) (type species).

Rajathelphusa View in CoL can easily be distinguished from Arcithelphusa View in CoL by the front being gently deflexed ( Figs. 3B View Fig , 4C View Fig , 7C View Fig ) (vs. front strongly deflexed); with distinct postorbital cristae ( Figs. 3A View Fig , 4B View Fig , 7B View Fig ) (vs. indistinct postorbital cristae); presence of a long flagellum on the exopod of third maxilliped ( Fig. 9A) (vs. short or no flagellum); a G1 with the terminal segment short and conical ( Fig. 9B–D, F–H) (vs. curved and elongate); and a G2 with a long distal segment ( Fig. 9E, I) (vs. G2 with short distal segment) (cf. Pati and Sudha Devi 2015a: fig. 2A, B, G 3B, D, E, I, Pati et al. 2019: fig. 2A, B, D, E, 3B, D, H, K, N, P, 4A, B, D, E). Rajathelphusa View in CoL can be distinguished from Cylindrotelphusa View in CoL by the anterolateral margins being weakly serrated to smooth ( Figs. 2A View Fig , 3A View Fig , 4B View Fig , 7B View Fig ) (vs. distinctly serrated); male telson triangular ( Figs. 3D View Fig , 4E View Fig , 7E View Fig ) (vs. distinctly elongate); and the G2 with a long distal segment ( Fig. 9E, I) (vs. G2 with short distal segment) (cf. Pati et al. 2017: fig. 11a, b, h, i, 12d, 13a, b, h, i, 14d). These morphological differences are substantial and require the establishment of a new genus.

Distribution: The genus is known only from Rajakumari and Marayoor regions of Idukki district, the southern Western Ghats, Kerala ( Fig. 1 View Fig ).

Rajathelphusa ala sp. nov. ( Figs. 2–5 View Fig View Fig View Fig View Fig , 9A–E) urn:lsid:zoobank.org:act:78B5F375-FF49-4A67-A479-6706357C4B2B

Material examined: Holotype: male (27.0 × 20.9 mm) ( ZSI / WGR /IR.INV./15361), in shallow to deep burrows near Rajakumari, Idukki district , Kerala, 9.966911°N, 77.129715°E, coll. S. Raj, 29 August 2016 GoogleMaps . Paratypes: 2 males (29.9 × 23.1 mm, 29.5 × 22.1 mm) (DABFUK/AR-BR-100, 101), 12 females (25.1 × 18.9 mm, 26.8 × 20.8 mm, 27.3 × 21.9 mm, 29.2 × 22.2 mm, 30.0 × 21.9 mm, 30.3 × 22.7 mm, 30.4 × 23.2 mm, 30.4 × 23.6 mm, 30.9 × 23.9 mm, 31.0 × 24.0 mm, 31.0 × 24.4 mm, 34.9 × 26.3 mm) (DABFUK/ AR-102-113), 3 males (24.2 × 20.8 mm, 26.3 × 20.7 mm, 30.7 × 23.5 mm), 2 females (28.2 × 22.5 mm, 32.0 × 25.3 mm) (DABFUK), same data as holotype.

Diagnosis: Carapace frontal region relatively narrow ( Figs. 2A View Fig , 3A, B View Fig , 4A–C View Fig ); external orbital tooth with outer margin gently sinuous to almost straight ( Figs. 3A, B View Fig , 4A–C View Fig ); male pleonal somite 6 subquadrate with gently convex lateral margins, telson with concave lateral margins ( Figs. 3D View Fig , 4E View Fig ); G1 terminal segment relatively short, conical, straight, directed anteriorly, surface lined with rows of long and short setae which do not obscure surface, gradually tapering to truncate tip, ca 0.16 times length of subterminal segment ( Figs. 3F View Fig , 9B–D).

Description of male holotype: Carapace broader than long, width ca. 1.3 times length; high, inflated in frontal view, dorsal surface convex ( Figs. 2A View Fig , 3A, B View Fig , 4A–C View Fig ). Frontal region relatively narrow, surface smooth or with low, flattened granules; lateral parts of anterolateral and posterolateral regions with prominent short oblique striae; suborbital with scattered low granules and striae; pterygostomial regions with distinct low granules of different sizes on margins, glabrous, separated from other regions by low ridge; sub-branchial regions with numerous short striae ( Figs. 3B View Fig , 4C View Fig ). Epigastric cristae low but distinct, not cristate, medially separated by shallow inverted Y-shaped furrow, slightly anterior of postorbital cristae; postorbital cristae distinct, raised, not sharp, confluent with epigastric cristae, joining lateral margin as granules and interrupted striae ( Figs. 3A View Fig , 4A, B View Fig ). Cervical grooves distinct, not broad, joining prominent H-shaped and branchial grooves ( Figs. 3A View Fig , 4A, B View Fig ). External orbital tooth low, tip slightly posterior to orbit, outer margin gently sinuous to almost straight, 3 times longer than inner margin; epibranchial tooth small, but separated from external orbital tooth by small cleft, positioned above external orbital tooth in frontal view ( Figs. 3A, B View Fig , 4A–C View Fig ). Anterolateral margins distinctly convex, uneven, striae given impression of margin being gently serrated ( Figs. 3A View Fig , 4A, B View Fig ). Posterolateral margins gently concave, converging to almost straight or gently sinuous posterior carapace margin ( Figs. 3A View Fig , 4A, B View Fig ). Orbits subovate, oblique in frontal view; eyes filling up most of orbital space, eye peduncle moderately long, stout; cornea large, pigmented ( Figs. 3A, B View Fig , 4A–C View Fig ). Supraorbital margin sinuous, complete; suborbital margin concave, lined with small rounded granules ( Figs. 3A, B View Fig , 4A–C View Fig ). Antennae short, not reaching cornea of eyes; antennules folding transversely in longitudinally narrow fossa ( Figs. 3B View Fig , 4C View Fig ). Posterior margin of epistome with distinct median triangular tooth, separated from lateral concave lobe by distinct gape ( Figs. 3B View Fig , 4C View Fig ). Mandibular palp distinctly 2-segmented; terminal article bilobed.

Third maxilliped ischium subrectangular, with distinct median sulcus; merus subquadrate with margins raised, median part depressed; exopod slender, not reaching midlength of merus, flagellum long, reaching about entire width of merus ( Figs. 3C View Fig , 4D View Fig , 9A).

Chelipeds distinctly asymmetrical ( Figs. 3A, G, H View Fig , 4A, G View Fig ). Dorsal margin of merus with strong striae, appears unevenly serrated, ventral margin with low granules ( Fig. 2 View Fig ). Outer surfaces of carpus rugose, distal angle with prominent sharp tooth with basal tubercle ( Figs. 2A View Fig , 3A View Fig , 4A View Fig ). Outer surface of chelae unevenly granulated, granules scattered; fingers of major chela curved, with median proximal gape when fingers closed, cutting margin with small teeth and denticles; fingers of minor chela straighter, similar to those of major chela except more slender, without gape ( Figs. 3G, H View Fig , 4G View Fig ).

Ambulatory legs slender, not elongate; P3 longest, P5 shortest ( Figs. 2 View Fig , 3A View Fig , 4A View Fig ). Merus with sharp dorsal and ventral margins but not cristate, margins unevenly serrate but low; carpus with low median crest; propodus subrectangular, with longitudinal median crest, ventral margin serrate; dactylus elongate, gently curved, lined with sharp spines ( Figs. 2 View Fig , 3A View Fig , 4A View Fig ).

Anterior thoracic sternum transversely narrow; sternites 1 and 2 completely fused to form triangular plate with convex lateral margins; separated from sternite 3 by shallow, median groove, otherwise fused; sternites 3 and 4 fused, demarcated by shallow oblique grooves; dense short setae on grooves between sternites 2 and 4. Suture between sternites 4/5, 5/6 and 6/7 medially interrupted, separated by narrow space; suture between sternites 7/8 complete, with longitudinal groove on sternites 7 and 8; sternite 8 completely covered by closed pleon ( Figs. 3E, F View Fig , 4F View Fig ). Sternopleonal cavity deep, narrow, reaching to imaginary line joining median points of cheliped coxae, distal margin on sternite 4 cristate ( Figs. 3E View Fig , 4F View Fig ). Male pleonal-locking tubercle low, round, positioned on distal third of sternite 5 ( Fig. 3F View Fig ). Penis on condyle of coxa of fourth ambulatory leg.

Pleon triangular, all somites and telson free; somites 1 and 2 longitudinally narrow, subequal in width, both less wide than somite 3; somite 3 trapezoidal, reaching to coxae of fourth ambulatory legs; somites 4 and 5 trapezoidal; somite 6 subquadrate with gently convex lateral margins, slightly wider than long; telson triangular with concave lateral margins, slightly wider than long ( Figs. 3D View Fig , 4E View Fig ).

G1 almost straight, groove for G2 ventral in position; terminal and subterminal segments clearly demarcated by distinct membranous suture; subterminal segment with proximal part broader, gradually tapering to more slender section along distal half, outer margin gently sinuous; terminal segment relatively short, conical, straight, directed anteriorly, surface lined with rows of long and short setae which do not obscure surface, gradually tapering to truncate tip, ca 0.16 times length of subterminal segment ( Figs. 3F View Fig , 9B–D). G2 long, as long as G1; with long, slender distal segment, about half length of basal segment ( Fig. 9E).

Females: The adult paratype female specimens (largest 34.9 × 26.3 mm, DABFUK/AR-BR-113) resemble the holotype in most non-sexual characters, with the major chela less swollen compared to similarlysized males, although the surface is relatively more rugose ( Fig. 5A View Fig ). Its pleon is ovate, with all the somites and telson free, covering most of the thoracic sternum except the lateral edges and distal parts of sternite 3 when closed ( Fig. 5B View Fig ). The vulvae, on somite 6 are large, subovate, positioned just adjacent to and pressing into the suture with sternite 5, the opening being membranous without any sternal vulvar cover ( Fig. 5C View Fig ).

Variation: The exopod of the third maxilliped usually has a long flagellum ( Fig. 9A), but in a number of specimens, this structure is missing; almost certainly the result of it being broken off. In most of these cases, only one of the third maxillipeds lacks the flagellum, the other being present. There is no variation in the length of the flagellum when present. The distal segment of the G2 varies in shape, from being straight to slightly curved in the specimens examined.

Colour: The carapace is dark brown in life, with the chelipeds and ambulatory legs light brown ( Figs. 2 View Fig , 5 View Fig , 6D View Fig ).

Etymology: The name of the species, which lives in deep burrows, alludes to the deep rock shelters tribal people in the region used to live in, which they name as ‘alas” (ala, singular). The name is used as a noun in apposition.

Distribution: The species is only known from Rajakumari (9.973453°N, 77.168647°E), a village about 1000 m above mean sea level, Idukki district of Kerala.

Remarks: For differences with R. muni sp. nov., see remarks for that species.

Ecology: The species lives in deep to shallow burrows along the sides of the streams and also away from water ( Fig. 6A–C View Fig ). The burrows, which are always away from the stream itself, are relatively deep.

Rajathelphusa muni sp. nov. ( Figs. 7 View Fig , 8 View Fig , 9F–H) urn:lsid:zoobank.org:act:BCEADCAB-2A47-42A3-AF55-5223AE837E68

M a t e r i a l e x a m i n e d: Holotype: male (30.2 × 22.6 mm) ( DABFUK /AR-BR-115), in deep burrows near to Kovilkadavu, Idukki district , Kerala, 10.261413°N, 77.183799°E, coll. S. Raj, 20 August 2016 GoogleMaps . Paratype: 1 male (carapace detached, 26.3 × 20.0 mm) (DABFUK/AR/-BR-114), same data as holotype.

Diagnosis: Carapace frontal region relatively wider ( Fig. 7A, B View Fig ); external orbital tooth with outer margin convex ( Fig. 7A, B View Fig ); male pleonal somite 6 subquadrate with almost straight lateral margins, telson with concave lateral margins, sometimes distinctly so ( Fig. 7E, F View Fig ); G1 terminal segment relatively shorter, conical, tip directed obliquely inwards towards median line, surface lined with rows of long and short setae which do not obscure surface, gradually tapering to truncate tip, ca 0.14 times length of subterminal segment ( Fig. 9F–H).

Colour: The carapace is reddish-brown in life, with the chelipeds and ambulatory legs yellowishbrown ( Fig. 8 View Fig ).

Etymology: The species is named after the saints (in Malayalam, ‘muni’) who used to take shelter in the dolmens (locally known as ‘muniyara’) in Kovilkadavu, a historic place in the Idukki district of Kerala where the new species was found. The name is used as a noun in apposition.

Distribution: The species is known only form Kovilkadavu (10.261413°N, 77.183799°E), a village near Marayoor, about 1000 m above sea level in Idukki district of Kerala

Remarks: Rajathelphusa muni sp. nov. is very close to R. ala sp. nov., but differs clearly in that the lateral margins of male pleonal somite 6 are almost straight ( Fig. 7E View Fig ) (vs. lateral margins of male pleonal somite 6 are convex in R. ala ; Figs. 3D View Fig , 4E View Fig ) and the G1 has the terminal segment proportionately shorter with the distal part turned inwards towards the median groove of the thoracic sternum ( Fig. 9F–H) (vs. G1 terminal segment more elongate and straighter in R. ala ; Fig. 9B–D). The differences are subtle, but the good series of specimens of R. ala demonstrate that the characters are consistent. Geographically, the type localities of the two species are only about 35 km apart (measured in a straight line, 84 km by road) but the terrain between the two locations is very uneven, with many small hills and high mountains.