Dibolostethus sicarius Hoffman, 2009
publication ID |
https://doi.org/ 10.5852/ejt.2023.885.2189 |
publication LSID |
lsid:zoobank.org:pub:444CE1D2-8098-4CDE-9B97-927CA13FC39F |
DOI |
https://doi.org/10.5281/zenodo.8205482 |
persistent identifier |
https://treatment.plazi.org/id/03CC1013-FFC4-3C7E-9458-F9233699F9A3 |
treatment provided by |
Felipe |
scientific name |
Dibolostethus sicarius Hoffman, 2009 |
status |
|
Dibolostethus sicarius Hoffman, 2009 View in CoL
Figs 3A, E View Fig , 4A–B View Fig , 5 View Fig , 8–9 View Fig View Fig
Dibolostethus sicarius Hoffman, 2009: 151 View in CoL , figs 1–11.
Diagnosis
Adult males of D. sicarius differ from those of D. kattani sp. nov. based on the lack of short, blunt projections on the sternite of the 5 th body ring, and from D. inopinatus sp. nov. and D. kattani sp. nov. based on the following combination of gonopodal characteristics: solenomere relatively straight until gently curving dorsally at apex, tip sinuous ( Fig. 5A View Fig ); prefemoral process slightly wider basally, expanded at midpoint and recurved, forming a cup-shaped depression before apex; apex with three lamellate flanges, best seen in anterior view ( Fig. 5B View Fig ).
Type material
Holotype ECUADOR • ♂; Los Rios Province [originally reported incorrectly as Pichinchi Province], Rio Palenque Science Center ; [0.588° N, 79.362° W]; 21 Mar. 1977; J. Reiskind leg.; VMNH110810 View Materials . GoogleMaps
Paratypes ECUADOR • 2 ♀♀; same collection data as for holotype; VMNH110811 View Materials , VMNH110812 View Materials GoogleMaps .
Description
Male (holotype, VMNH110810)
With characteristics typical for the genus. Coloration (preserved in 70% isopropanol): body rings light brown to caramel; antennae and head light yellow; legs light yellow; telson reddish, with posterior margin (= spinnerets region) yellowish. Head: epicranial macrosetae 2+2, interantennal macrosetae 1+1, frontal macrosetae 2+2. Sternites: 4 th body ring with two thin, blade-like acute projections, tips separated throughout, nearly translucent ( Fig. 4A–B View Fig ). Gonopod aperture on 7 th body ring oval, rim notably projecting above sternite (0.35 mm), with a deep U-shaped concavity (0.2 mm) on posterior margin.
GONOPODS ( Fig. 5 View Fig ). Gonocoxae rounded, equivalent to about three quarters the length of the telopodite; dorsum of left and right gonocoxa with 2 and 3 (possible aberration) macrosetae, respectively. Solenomere long, slender, unbranched, apex falciform and partially enveloped by prefemoral process ( Fig. 5 View Fig , S). Prefemoral process: long (similar in length to solenomere), width subequal to solenomere, widening at halfway point with a medial knob before curving laterad into a cup-like structure; apex broad, with a series of lamellate flanges resembling a hammerhead shark in lateral view ( Fig. 5 View Fig , PfP).
BODY MEASUREMENTS (mm). Total length 24.8, width of 10 th body segment 1.98. Antennomere lengths (1–7): 0.38, 0.75, 0.85, 0.85, 0.85, 0.85, 0.25. Collum: length 0.5, width 1.4. Podomere lengths of 10 th body ring (1–7): 0.28, 0.55, 0.9, 0.34, 0.53, 0.95, 0.09. Gonopod aperture: length 0.50, width 0.78. Gonopod: length 0.99, width 0.86. Gonocoxae: length 0.63, width 0.36. Telopodite: length 0.98, width 0.31. Telson length 0.78.
Female (paratype, VMNH110811) Coloration (preserved in 70% isopropanol) as in male. Body larger and more robust than male. Similar to male in general body outline and somatic characters, except sternite of 4 th body ring without pair of acute projections, 4 th, 5 th, and 6 th podosterna elevated to a lesser degree, 4 th and 5 th pair of legs not modified, and tibia lacking acute ventro-apical projections.
BODY MEASUREMENTS (mm). Total length 30.95, width of 10 th body segment 2.6. Antennomere lengths (1–7): 0.38, 0.9, 0.93, 0.88, 0.85, 0.83, 0.23. Collum: length 1.0, width 1.7. Podomere lengths of 10 th body ring (1–7): 0.3, 0.53, 0.9, 0.38, 0.45, 0.98, 0.09. Vulvar aperture width 0.56. Posterior margin of vulvar rim: well sclerotized, U-shaped; width 0.13. Vulvae: small, unmodified, setose ( Fig. 8 View Fig ); length 0.45, width 0.29. Valves symmetrical. External valve: lateral length 0.5, lateral height 0.44; dorsal length 0.39, dorsal width at midpoint 0.14. Operculum: length 0.06, width 0.21. Telson length 1.15.
Distribution
Herein restricted to the Los Rios Province, Ecuador ( Fig. 9 View Fig ).
No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.
Kingdom |
|
Phylum |
|
Class |
|
Order |
|
Family |
|
Genus |
Dibolostethus sicarius Hoffman, 2009
Means, Jackson C., Bouzan, Rodrigo S., Iniesta, Luiz Felipe Moretti, Martínez-Torres, Daniela, Vasquez-Valverde, Luisa F., Brescovit, Antonio D. & Ivanov, Kaloyan 2023 |
Dibolostethus sicarius
Hoffman R. L. 2009: 151 |