Jinzhousaurus Wang and Xu, 2001a

Barrett, Paul M., Butler, Richard J., Xiao-Lin, Wang & Xing, Xu, 2009, Cranial anatomy of the iguanodontoid ornithopod Jinzhousaurus yangi from the Lower Cretaceous Yixian Formation of China, Acta Palaeontologica Polonica 54 (1), pp. 35-48 : 36-45

publication ID

https://doi.org/ 10.4202/app.2009.0105

persistent identifier

https://treatment.plazi.org/id/0002E60F-FF84-FFFA-FCE3-49D000B5417E

treatment provided by

Felipe

scientific name

Jinzhousaurus Wang and Xu, 2001a
status

 

Genus Jinzhousaurus Wang and Xu, 2001a Jinzhousaurus yangi Wang and Xu, 2001a

Holotype: IVPP V12691 , a largely complete individual comprising the skull and most of the postcranial skeleton.

Type locality: Baicaigou, Toutai, Yixian County, Liaoning Province, People’s Republic of China.

Type horizon: Dakangpu Member (equivalent to the Dawangzhangzi Beds) of the Yixian Formation, lower Aptian (Lower Cretaceous) ( Swisher et al. 1999).

Revised diagnosis (cranial features only).—Differs from all other iguanodontoid taxa in possessing the following features: lachrymal reduced in size with a sub−triangular outline; nasals terminate in a pointed, sub−triangular caudal process that overlaps the frontals; frontals fused; frontal unit with a “ T ”−shaped outline in dorsal view and prominent, distinct postorbital processes that are offset from the main body of the bone; laterodorsal surface of the frontal bears an elongate shallow depression.

Comments.—The postcranial skeleton of the holotype specimen was unprepared at the time of the initial description; consequently, the original diagnosis was based solely on cranial characters ( Wang and Xu 2001a, b). However, most of the features listed by Wang and Xu (2001a, b) have a much wider distribution among iguanodontoids, including: a long preorbital region; triangular maxilla in lateral view with elongate rostral process; absence of an external antorbital opening; exclusion of frontals from the dorsal orbital margin; curved quadrate shaft; long axis of supratemporal fenestra oriented anterolaterally; presence of 16 dentary teeth; and dentary teeth become larger in the caudal part of the tooth row (see Taquet 1976; Norman 1980, 1986, 1998, 2002; Lü 1997; Kobayashi and Azuma 2003; You et al. 2003 a). An additional character (weakly bilobate ventral process of the predentary) appears to be absent (see below). However, the presence of several autapomorphic features and the unique combination of character states in the skull strongly supports the retention of Jinzhousaurus as a valid taxon. Paul (2008) proposed an emended diagnosis of this genus, but none of the features he listed are autapomorphic for Jinzhousaurus and many are in error. These issues are discussed in more detail in the Discussion (below).

Description

The skull appears to be essentially complete and articulated, but has been mediolaterally compressed, resulting in some crushing, cracking and distortion ( Fig. 1 View Fig ). It is partially embedded in a slab of matrix that obscures most of the right mandible and the right side of the skull: the rostral margin of the cervical vertebra 5

right dentary and right premaxilla are partially visible. However, the left side of the skull and the left mandible are fully exposed. The entire skull roof is available in dorsal view, but most of the palate and neurocranium are occluded by other elements. Additional preparation carried out subsequent to the initial description has revealed the presence of the right palpebral and right pterygoid ( Figs. 1–3 View Fig View Fig View Fig ); the latter is isolated from the rest of the skull, suggesting that the embedded right side of the skull may be badly damaged. Some of the sutures between individual cranial elements are difficult to determine and a few (e.g., the interfrontal suture) have become indistinguishably fused, suggesting that this represents an adult individual. In most cases, individual elements are only visible in one or two views, restricting the amount of anatomical information that can be extracted from the specimen. Comparisons with other taxa are based on personal observations of Iguanodon , Mantellisaurus and hadrosaurid material housed in the collections of NHM (e.g., Mantellisaurus atherfieldensis NHM R 5764 and R 11521; Edmontosaurus sp. NHM R 3637, R 4862, and R 8927; Lambeosaurus sp. NHM R 9527, R 9528, and on published descriptions of Altirhinus ( Norman 1998) , Dollodon ( Norman 1986) , Eolambia ( Kirkland 1998; Head 2001), Equijubus ( You et al. 2003 a) , Fukuisaurus ( Kobayashi and Azuma 2003) , Iguanodon ( Norman 1980) , Lanzhousaurus ( You et al. 2005) , Mantellisaurus ( Hooley 1924; Norman 1986), Ouranosaurus ( Taquet 1976) , Probactrosaurus (Norman 2002) , “ Probactrosaurus ” mazongshanensis ( Lü 1997) , Protohadros ( Head 1998) , Shuangmiaosaurus ( You et al. 2003 b) and hadrosaurids ( Ostrom 1961; Horner 1992; Horner et al. 2004; Evans and Reisz 2007; Gates and Sampson 2007; Gates et al. 2007).

General skull proportions are very similar to those of Dollodon , Iguanodon , and Mantellisaurus , with an elongate preorbital region that accounts for approximately 64% of total skull length (525 mm as measured from the caudal margins of the parietals to the tip of the snout). The external narial fossa is dorsoventrally narrow but rostrocaudally elongate, accounting for approximately 43% of preorbital skull length, which is considerably larger than in Dollodon , Iguanodon , Mantellisaurus or Ouranosaurus (approximately 30% in the former three taxa and 18% in Ouranosaurus ), but shorter than that of Altirhinus (approximately 57% of preorbital skull length). Its caudal portion extends over the rostral part of the maxillary tooth row, as occurs in all but the most basal iguanodontians (e.g., Dryosaurus : Galton 1983). Although the circumorbital bones are slightly distorted, it appears that the orbit was small and circular in outline. As in Altirhinus , Equijubus , Protohadros , and hadrosaurids, there is no indication of an external antorbital fossa or fenestra in Jinzhousaurus . In dorsal view, the supratemporal fenestrae are sub−triangular in outline, with the apex of the triangle directed medially ( Figs. 1 View Fig , 2 View Fig ). They are longer rostrocaudally than they are wide transversely. The left infratemporal fenestra has an elliptical outline, with its long axis directed caudodorsally. The lower jaw lacks an external mandibular fenestra. In contrast to many of the other dinosaur specimens from the Dawangzhangzi Beds of the Yixian Formation (e.g., Sinosauropteryx , Caudipteryx , Protarchaeopteryx : Xu and Norell 2006), the holotype specimen of Jinzhousaurus lacks any preserved soft−tissues.

Premaxilla.—Both premaxillae are present and the left premaxilla is generally well preserved. The right premaxilla is partially obscured by its antimere, but its rostral margin is visible and portions of its medial surface can be seen through the left external naris ( Fig. 1 View Fig ). Both narial processes are extensively cracked. The exact shape of the snout cannot be determined with certainty due to crushing of the specimen; however, it seems likely that the premaxillae would have flared at least slightly laterally, as occurs in many other basal iguanodontoids (e.g., Dollodon , Equijubus , Iguanodon , Mantellisaurus , and Probactrosaurus ), but would have lacked the stronger expansion seen in Protohadros and hadrosaurids.

In lateral view, the premaxilla consists of a sub−quadrate plate that supports two elongate, caudodorsally extending processes: a rostrodorsally situated narial process and a caudodorsally positioned maxillary process. Rostrally, the margin of the premaxillary body is rugose and forms a narrow raised platform relative to the rest of the lateral surface. This platform bears three small circular foramina: two are positioned close to the rostral margin of the bone and the third is positioned on the caudal margin of the raised area. Caudal to this, the main body of the premaxilla is shallowly excavated to form a broad smooth narial fossa that surrounds the ventral and caudoventral margins of the external naris. Unfortunately, the ventral margins of both premaxillae are obscured by the presence of the predentary, so it is not possible to determine if the premaxilla was crenulate or edentulous. The rostral end of the premaxilla is strongly down−turned and extends for a significant distance ventral to the dentary tooth row, as also occurs in Altirhinus , Equijubus , Protohadros , and hadrosaurids, although this has been slightly accentuated by crushing.

The narial and maxillary processes form the rostroventral and caudoventral margins of the external naris. The narial process is gently curved, rostrocaudally narrow and tapers caudally. Its ventral margin forms an extensive overlapping contact with the nasal and the latter element excludes the premaxilla from the caudodorsal margin of the external naris. The lateral surface of the narial process is strongly convex rostrocaudally. The opposing narial processes meet along the midline in a straight suture and their apices intervene between the rostral margins of the nasals, forming “ V ”−shaped contacts. It should be noted that in our interpretation, these processes extend much further caudally than shown in the figure accompanying the original description ( Wang and Xu 2001b: fig. 2).

In lateral view, the surface of the maxillary process is gently convex to planar along its entire length; this surface is separated from the depressed narial fossa by a blunt dorsoventrally extending ridge of bone. The ventral margin of the process forms a long sloping articular contact with the maxilla, while its dorsal margin forms most of the caudoventral boundary of the external naris. The maxillary process increases in dorsoventral depth caudally, reaching its maximum depth at a point just rostral to its apex. This is similar to the condition seen in Altirhinus , Eolambia , Ouranosaurus , and Probactrosaurus , but contrasts with that seen in other basal iguanodontoids (e.g., Dollodon , Equijubus , Iguanodon , and Mantellisaurus ), in which the maxillary process is much more slender and tapers distally. The caudal end of the maxillary process is fractured and a flake of bone in this area that was previously interpreted as the rostral end of the lachrymal ( Wang and Xu 2001a, b) is regarded here as part of the premaxilla. This reinterpretation results in the presence of a broad contact between the premaxilla and prefrontal, as occurs in Dollodon , Equijubus , Iguanodon , Mantellisaurus , and some hadrosaurids (but not in basal iguanodontians, Altirhinus or Ouranosaurus ); the caudoventral part of the maxillary process still contacts the lachrymal, but this articulation is smaller than previously suggested. Medially (visible on the right premaxilla only), the maxillary process bears a series of longitudinal ridges that presumably form part of an articular surface for the rostromedial portion of the maxilla.

Maxilla.—The maxilla is a rostrocaudally elongate element with a low triangular outline in lateral view, with its apex positioned at the junction of the maxilla, premaxilla, prefrontal and lachrymal. Its rostral tip is strongly down−turned, forming a sub−vertical articulation with the premaxillary body and paralleling the morphology of the latter element. The rostrodorsal margin of the maxilla forms a long, straight sloping contact with the maxillary process of the premaxilla, while the dorsocaudal maxillary margin incorporates a short articulation for the lachrymal (dorsally) and a more extensive jugal contact (ventrally).

The dorsal part of the lateral surface is relatively flat, but exhibits small, irregular concavities and convexities. In addition, numerous small foramina are present in this area: these all have sub−circular outlines and open in a rostrolateral direction. They are irregularly distributed, but appear to be concentrated on the rostral half of the element: they are not as numerous or as well−developed as those that occur in Equijubus ( You et al. 2003 a) . There is no evidence for an antorbital opening. Ventrally, a well developed, acute and rostrocaudally extending ridge defines the dorsal boundary of a deep buccal emargination. Beneath this ridge the lateral surface of the maxilla is bevelled ventromedially and extends toward the midline resulting in a deeply inset tooth row. The buccal emargination increases in depth caudally, reaching its maximum depth at the end of the tooth row. Several larger, elliptical foramina (all of which open rostrolaterally) lie within the buccal emargination, forming a linear series that is positioned at a point approximately halfway between the buccal ridge and the tooth row. At the caudal end of the maxilla, the ridge defining the buccal emargination is extended into a hook−like jugal process (absent or reduced in Equijubus and Fukuisaurus , but present in Altirhinus , Eolambia , Iguanodon , Mantellisaurus , and Ouranosaurus ), which overhangs the caudalmost part of the buccal emargination and bears a ventral sulcus.

A small shallow fossa is present on the rostrolateral surface of the maxilla, adjacent to the premaxillary suture ( Fig. 1B View Fig ). This fossa does not penetrate the body of the maxilla and its caudal border is sharply defined by a raised lip of bone. It is elliptical in outline with the long axis orientated caudodorsally: this feature does not appear to be present in Altirhinus , Dollodon , Eolambia , Equijubus , Fukuisaurus , Iguanodon , Ouranosaurus , Protohadros , or Shuangmiaosaurus , but a similar structure is visible in some individuals of Mantellisaurus (NHM R 11521: although it appears to be absent in others, such as NHM R 5764) and is variably developed in hadrosaurids (Jason Head, personal communication 2008). Most of the maxillary teeth are almost completely obscured by the dentary teeth, so it not possible to determine the exact number of tooth positions. However, some teeth are partially exposed allowing their size and arrangement to be observed (see Fig. 3C View Fig ); on this basis it is estimated that 15–16 teeth were present.

Nasal.—In dorsal view, the nasals are elongate strap−like elements that meet each other at a simple midline articulation. They are widest at a point level with the caudal margin of the maxillary process of the premaxilla and taper in width rostrally. The dorsal surface of each nasal is mediolaterally convex: this results in the presence of an elongate sagittal depression that extends caudal to the termination of the narial process of the premaxilla. Although this feature is genuine, it has been accentuated by deformation. The caudal margin of the nasal extends as a sub−triangular process that overlaps the rostrodorsal corner of the frontal ( Figs. 1B View Fig , 2 View Fig ): this differs slightly from a previous description ( Wang and Xu 2001a, b), in which the nasofrontal joint is shown to be transversely straight as also occurs in Dollodon , Iguanodon , and Ouranosaurus . The prefrontal articulation is situated on the caudolateral margin and forms a straight rostrocaudally oriented joint.

In lateral view, the nasal is gently arched along its entire length. Caudally, its lateral margin has an extensive contact with the maxillary process of the premaxilla. Rostrally, the nasal divides into two processes: a slender and elongate anteromedial process, which comprises the majority of the rostral portion of the element, and a very small, sub−triangular anterolateral process. The lateral margin of the anteromedial process forms the dorsal margin of the external naris, whereas its medial margin is overlapped by the narial process of the premaxilla. The anterolateral process forms the caudalmost bor− der of the external naris: this process is absent in Dollodon , Equijubus , Iguanodon , and Mantellisaurus , but is present in Altirhinus and hadrosaurids. A small circular foramen is present close to the lateral margin of the nasal, near to the apex of the maxilla.

Prefrontal.—The prefrontal is sub−rectangular in dorsal view and is approximately three times longer than wide, with its long axis directed rostrocaudally. Its dorsal surface is rostrocaudally concave, but this probably represents an artefact of compression. Several small foramina are present on the posterolateral corner of the dorsal surface close to its caudal margin. One of these is positioned close to the orbital margin and is sub−circular in outline; two larger elliptical foramina are situated caudomedial to the first. Rostrally, the medial surface of the prefrontal contacts the nasal, but caudally it articulates with the frontal. The caudal margin of the element is reduced in transverse width and forms a sub−triangular process that articulates with the postorbital: this postorbital/prefrontal articulation excludes the frontal from the dorsal margin of the orbit. Consequently, the prefrontal forms the rostrodorsal margin of the orbit in lateral view. Its orbital (lateral) margin is thickened dorsoventrally and is rugose, as also occurs in Protohadros . Together with a depression on the caudodorsal margin of the lachrymal, a roughened surface on the rostrolateral corner of the prefrontal forms the articular surface for the palpebral. The rostrolateral part of the prefrontal contacts the maxillary process of the premaxilla (contra Wang and Xu 2001a, b: see above). In the English translation of the original description, it is noted that “the prefrontal is large … accounting for about 60% of the length of the skull” ( Wang and Xu 2001b: 1671): however, this appears to be a translation error and the element referred to in this statement is actually the premaxilla.

Lachrymal.—In lateral view, the lachrymal is a small sub−triangular element that forms the rostral margin of the orbit. Its rostrodorsal margin contacts the prefrontal along most of its length, but rostrally it has a small contact with the premaxilla. The ventral margin abuts the maxilla, but breakage of the specimen prevents determination of its relationship with the jugal. Its caudal border is pierced by a large foramen at approximately mid−height. The lateral surface of the element is strongly rugose and textured and bears an articular surface for the palpebral. In other iguanodontoids, including Altirhinus , Dollodon , Equijubus , Iguanodon , Mantellisaurus , Ouranosaurus , and hadrosaurids, the lachrymal is a relatively larger element and has a sub−quadrangular outline. The lachrymal does not contact the nasal (contra Wang and Xu 2001a, b; contra Paul 2008; Figs. 1B View Fig , 2 View Fig ).

Jugal.—In lateral view, the jugal consists of three main processes: a rostrally directed maxillary process, a caudodorsally directed postorbital process, and a caudally situated quadratojugal process. These three processes converge to meet in a dorsoventrally narrow main body that forms part of the caudoventral border of the skull. The maxillary process is sub−triangular in outline and tapers in height anteriorly: its ventral margin articulates with the maxilla and its dorsal margin forms the ventral border of the orbit. It is not possible to determine the exact nature of the lachrymal articulation due to poor preservation. This morphology differs substantially from the condition in Equijubus , in which the maxillary process is exceptionally elongate and possesses a peg−like projection that originates from its dorsal margin ( You et al. 2003 a). The lateral surface of the maxillary process is gently convex dorsoventrally. The base of the maxillary process is slightly waisted, such that its dorsal and ventral margins converge before expanding again to merge with the main body of the bone. There is a distinct change in slope of the surface at this point and the surface of the jugal main body is more strongly convex than that of the maxillary process. The ventral margin of the jugal is stepped in lateral view, with an angle of approximately 120 ° separating the ventral margins of the maxillary and quadratojugal processes. A very small foramen is present on the main body, situated at the junction of the maxillary and postorbital processes.

The postorbital process is significantly longer than the maxillary process, is rostrocaudally narrow and tapers dorsally. It is mediolaterally expanded, producing a sub−triangular to sub−rectangular transverse cross−section, and its rostral margin bears a deep groove for the reception of the postorbital. In lateral view, the postorbital process forms the caudoventral margin of the orbit and the rostroventral margin of the lower temporal fenestra. It forms an angle of approximately 100 ° with the maxillary process. Finally, the quadratojugal process is greatly expanded relative to the main body of the bone and has a dorsoventrally elongate caudal margin, resulting in a fan−like outline in lateral view. Its rostrodorsal margin, together with the dorsal margin of the main body, forms the ventral and caudoventral margins of the infratemporal fenestra.

Quadratojugal.—The quadratojugal is a flat, plate−like element that has become disarticulated and has shifted from its original position to lie ventral to the jugal and cover the ventral half of the quadrate. It is sub−crescentic in outline, with the length of the caudal margin exceeding that of the rostral margin. The rostral margin is dorsoventrally convex in lateral view, whereas the caudal margin is broadly concave and forms the rostral margin of the paraquadratic foramen. The rostral portion of the lateral surface is slightly depressed relative to the rest of the bone, forming the articular surface for the jugal. This articular surface accounts for approximately 50% of the rostrocaudal length of the element, suggesting that a large part of the caudal portion of the quadratojugal would have been exposed in lateral view when in life position, in contrast to the condition in Iguanodon , Mantellisaurus and some hadrosaurids in which only a thin portion of the element is visible. The exposed area would have been ventrally broad, narrowing dorsally, and is weakly convex rostrocaudally and shallowly concave dorsoventrally. It is likely that the quadratojugal made a small contribution to the caudoventral margin of the infratemporal fenestra, as also occurs in Altirhinus and Ouranosaurus .

Pterygoid.—The right pterygoid has become separated from the rest of the skull and is visible in medial view ( Fig. 3A View Fig ). Other small portions of the palate are visible through the left orbit and left infratemporal fenestra, but these cannot be identified with confidence. The pterygoid is a tetraradiate element consisting of four processes that radiate from a central plate. These four processes are: the palatal ramus, which extends anteriorly and a little dorsally; the ectopterygoid ramus, which extends ventrally and formed part of the pterygoid flange; and the inferior and superior parts of the quadrate ramus, which both articulate with the pterygoid wing of the quadrate, and extend caudally and caudodorsally, respectively. The rostralmost part of the palatine ramus consists of a vertically oriented flat sheet of bone. Distally, this sheet contracts dorsoventrally into a rod like structure that continues as a prominent ridge that traverses the main body of the bone. This ridge merges with and extends over much of the central plate, and terminates in a knob−like buttress. The palatine ramus forms an angle of approximately 120 ° with the short ectopterygoid ramus; the latter is a stout sub−triangular process whose dorsal surface forms a low ridge that merges with the knob−like buttress on the central plate.

The inferior quadrate ramus is separated from the ectopterygoid ramus by an angle of approximately 60 °. This process has a sub−triangular outline and is flat and plate−like for most of its length; however, the rostral part of its ventral margin is thickened to form an extensive buttress that merges with the other ridges and buttresses that converge on the central plate of the pterygoid. The buttress along the ventral surface of the inferior quadrate ramus is slightly recurved to form a long shallow sulcus opening dorsally; this sulcus and the knob−like buttress together probably form the region for the basal articulation. The superior part of the quadrate ramus is also a flat triangular sheet of bone that is separated from the inferior part of the quadrate ramus by an angle of approximately 60 °. It bears a very low central eminence that extends towards the central plate, but this eminence is not developed into a distinct ridge. Part of the central plate between the superior quadrate ramus and the palatine ramus appears to be missing, and the superior part of the quadrate ramus is separated from the palatine ramus by an angle of approximately 120 °.

Quadrate.—Only the dorsal portion of the left quadrate is visible: its ventral part is obscured by the quadratojugal and jugal. This interpretation differs from that of Wang and Xu (2001a, b), who identified the caudal part of the quadratojugal as the ventral part of the quadrate. The quadrate is a vertically oriented columnar element that is bowed rostrally, with a concave caudal margin. The quadrate shaft supports two rostrally directed rami: the quadratojugal and pterygoid wings. In lateral view, there is a prominent notch in the rostral margin of the quadratojugal wing that marks the position of the paraquadratic foramen. Dorsal to this notch, the rostral margin of the quadratojugal wing bears a deep groove with sharp, acute margins. The ventral part of this groove probably accommodated the dorsal part of the quadratojugal and part of the quadratojugal process of the jugal. The remainder of the groove is separated from the ventral section by a distinct break in slope: the dorsal part of the groove would have received the rostroventral process of the squamosal. The head of the quadrate is poorly preserved, but may have been slightly offset from the rest of the shaft. It has a sub−triangular cross section as preserved. The pterygoid wing is visible through the infratemporal fenestra. It is large and sheet like, but has been distorted and cracked. Together with the quadratojugal wing, it defines a deep sulcus on the rostral surface of the quadrate for the origin of the M. adductor posterior.

Squamosal.—The squamosal consists of a small main body that supports four processes: a rostral process that contacts the postorbital; a medial process that contacts the parietal; a ventral process that articulates with the quadrate; and a caudoventral process that articulates with the quadrate and paroccipital process. The squamosal forms the caudodorsal corner of the infratemporal fenestra and the caudolateral corner of the supratemporal fenestra.

In lateral view, the rostral and ventral processes are separated from each other by an angle of approximately 45 °. Much of the lateral surface of the bone is excavated to form a deep sub−triangular sulcus that would have housed the origin of the M. adductor externus superficialis. The rostral process of the left squamosal is largely obscured by the postorbital, but that of the right squamosal is more accessible: this process tapers rostrally and its lateral surface bears a deep “V”−shaped groove for the reception of the postorbital. The ventral process is relatively short and has a sub−crescentic transverse cross−section: its rostral margin is transversely convex, while the caudal margin is transversely concave. A groove on the caudal margin of the ventral process would have formed an articular surface for the rostral margin of the quadrate. The ventral process was not long enough to have contacted either the jugal or quadratojugal. Together with the caudoventral process, the ventral process forms the articular surface for the head of the quadrate. The ventral and caudoventral processes extend almost parallel to each other and are similar in length, but it is likely that the caudoventral process has been crushed and is not in its correct orientation. In dorsal view the medial process forms an angle of approximately 45 ° with the rostral process and tapers rostrally towards its contact with the parietal. In caudal view, the medial processes of the squamosals approach each other closely, but do not contact one another (contra Wang and Xu 2001a, b; contra Paul 2008; Figs 1 View Fig , 2 View Fig ).

Postorbital.—The postorbital is a triradiate element consisting of three processes that converge to form a centrally positioned, sub−triangular main body. These processes extend rostrally, rostroventrally and caudally, respectively. The rostral process contacts the prefrontal, excluding the frontals from the orbital margin. In dorsal view, this process is bifid and the caudal process of the prefrontal intervenes between these two branches. The lateral branch of the rostral process forms the dorsolateral margin of the orbit and articulates solely with the prefrontal, whereas the medial branch articulates with both the frontal and prefrontal. In lateral view, the orbital margin is thick and strongly rugose, which may be correlated with the presence of an accessory palpebral (see below). Similar rugosities are present in this position in Altirhinus and Probactrosaurus , but are absent in Dollodon , Iguanodon , Mantellisaurus , and Ouranosaurus . The dorsal surface of the rostral process bears several small sub−circular foramina and is very gently convex rostrocaudally. The lateral surface of the process is slightly offset from the rest of the postorbital lateral surface by a distinct ridge. There may be a point contact with the parietal but this is difficult to establish.

The ventral (jugal) process is largely obscured, but is strongly curved rostrally. Ventrally, it tapers both rostrocaudally and mediolaterally, producing a sub−triangular transverse cross−section, and terminates in a sharp point. Although this morphology is similar to that in the majority of other basal iguanodontoids it differs markedly from the condition present in Equijubus , the postorbital of which lacks a well−developed ventral process. In Jinzhousaurus , the caudal process is damaged distally, but is parallel−sided for most of its length. A small foramen is present on the central part of this process, which forms the rostrolateral margin of the supratemporal fenestra. The process forms an elongate tongue−in−groove joint with the squamosal.

Frontal.—The frontals are indistinguishably fused to each other and the midline suture has been completely obliterated. This appears to be unique among iguanodontoids for which appropriate material in known and is proposed as an autapomorphy of Jinzhousaurus ; an interfrontal suture is still visible in Altirhinus , Dollodon , Eolambia , Iguanodon , Mantellisaurus , Ouranosaurus , Probactrosaurus , “ Probactrosaurus ” mazongshanensis , Protohadros , and hadrosaurids. Taken together, the frontals form a broad sub−triangular, almost “T”−shaped, unit in dorsal view that extends to a point level with the rostral margin of the orbit ( Figs. 1 View Fig , 2 View Fig ). As in lambeosaurine and some hadrosaurine hadrosaurids, the frontals do not contribute to the orbital margin. This is in marked contrast to the condition present in other non−hadrosaurid iguanodontoids (e.g., Altirhinus , Iguanodon , Ouranosaurus , Probactrosaurus , and Protohadros ), in which the frontal makes at least a small contribution to the orbital fenestra. The caudolateral corner of each frontal expands laterally to form a stout postorbital process that is distinctly offset from the main body of the bone. As a result, the greatest transverse width of the frontal lies close to its caudal border, across the postorbital processes. Again, this differs from the morphology seen in the majority of basal iguanodontoids, which have frontals with an elliptical outline in dorsal view and lack a prominent postorbital process. The maximum length of the frontals is approximately equal to their combined maximum width across the postorbital processes.

In dorsal view, the central portions of the frontals are transversely convex but are nearly straight anteroposteriorly. Lateral to the midline convexity, a prominent depression extends along the rostrolateral margins of the bone. These depressions lie medial to, and merge with, the prefrontal/frontal articulation. Other basal iguanodontoids appear to lack these features (e.g., Dollodon , Iguanodon , Mantellisaurus , and Ouranosaurus ) and they may represent an autapomorphy of Jinzhousaurus . Rostrally, the frontal has a straight transverse margin, but the rostrodorsal surface bears a sub−triangular facet for articulation with the caudal processes of the nasal. Similarly, the postorbital process bears a small notch for the reception of the postorbital. Caudally, the frontals contact the parietal along a weakly interdigitate suture. However, near the midline, the caudal border of the fused frontal unit is notched to form a “V”−shaped articular surface for the parietals: the latter elements form a distinct triangular process that intervenes between the frontals for a short distance. A similar feature is present in Altirhinus , but is absent in Dollodon , Iguanodon , Ouranosaurus , and “ Probactrosaurus ” mazongshanensis . However, some individuals referred to Probactrosaurus appear to possess an incipient version of the condition present in Altirhinus and Jinzhousaurus (see Norman 2002: fig. 8C). Finally, the frontals of Jinzhousaurus form the rostral border of the supratemporal fenestra, but are not excavated by supratemporal fossae.

Parietal.—The midline suture between the parietals has been obliterated and the combined parietal unit has been broken into two sections, one that is still in articulation with the frontals (rostral section) and a caudal section that has been displaced to partially overlap the rostral part of the unit. Each parietal consists of a central body with paired rostrolateral and caudolateral processes. The former extend laterally towards the postorbitals; the latter extend caudolaterally to articulate with the squamosals. The rostrolateral processes are elongate and well−developed. The main body is strongly vaulted, with a sharp sagittal ridge, and the lateral surfaces are steeply inclined to extend downward and form the sidewall of the braincase. The sagittal ridge bifurcates rostrally, with each branch of this ridge extending laterally to merge with the rostral margin of the supratemporal fenestra. Similar ridges are present in most other basal iguanodontoids, but in “ Probactrosaurus ” mazongshanensis the junction between the parietals is marked by a shallow groove ( Lü 1997). On the rostral midline, a “V”−shaped projection extends between the frontals. Lateral to this projection, the parietal expands mediolaterally to form the rostrolateral processes, which contact the posterior surface of the frontals below the level of the skull table. This articulation is not easy to determine in dorsal view, but can be seen in caudodorsal view: similar comments apply the parietal/postorbital articulation, which is visible through the supratemporal fenestra although the contact is small and its exact nature is difficult to determine. Caudally, the parietals narrow to form the medial margins of the supratemporal fenestra before expanding transversely for a second time to form the caudolateral processes. The latter are overlapped along their caudal surfaces by the medial processes of the squamosals. The parietal forms a small part of the skull margin in posterior view, excluding contact between the squamosals. The caudal part of the parietal was incorrectly identified as the paroccipital process by Wang and Xu (2001a, b).

Palpebrals.—A palpebral and accessory palpebral are present, as in Iguanodon . They were free elements and were not incorporated into the main orbital margin. The left palpebral is preserved in the left orbit, whereas the right element lies dorsal to the skull roof. Both are exposed in dorsal view. The palpebral is stout, rod−like and transversely expanded at its rostral end. It is weakly arched rostrocaudally in lateral view and bowed laterally in dorsal view. The dorsal and lateral surfaces are transversely convex. Small rugosities are situated on the lateral margin and the bone surface is roughly textured. The caudal end of the palpebral is squarely truncated and rugose, forming an articular surface for an accessory palpebral. Only the left accessory palpebral is preserved: it is a small sub−triangular element that is situated in the infratemporal fenestra.

Neurocranium.—A small portion of the braincase is present, but few details are available as it is badly damaged and largely obscured by other skull elements. A highly fractured section of bone ventral to the parietal probably represents the prootic, but no nervous or vascular foramina can be identified. Another small section of bone visible through the left infratemporal fenestra might represent part of the left paroccipital process. No other features can be determined.

Predentary.—The predentary is closely appressed to the ventral margin of the left premaxilla ( Fig. 3B View Fig ). In rostral view, the main body of the bone is crescentic and tapers caudolaterally to form the lateral processes. Its dorsal (oral) margin is crenulated and the most prominent denticle is situated on the midline. The elongate ventral process is not bifurcate (contra Wang and Xu 2001a, b), in contrast to those of Altirhinus , Dollodon , Equijubus , Iguanodon , Protohadros , and hadrosaurids, and expands transversely towards its caudal end, giving it a sub−trapezoidal outline in rostral or ventral view ( Fig. 3B View Fig ). Lateral to the base of the ventral process, deep grooves extend rostrally towards small circular foramina that open at a point approximately halfway along the dorsoventral height of the bone. These foramina, together with three or four smaller openings, form a row that extends parallel to the oral margin.

Dentary.—Both dentaries are present; the left dentary is visible in lateral view, but only the rostromedial part of the right dentary is exposed. The dentary is a robust, elongate element that comprises most of the length of the mandible: it is much more slender than the exceptionally deep dentary of Fukuisaurus . Its dorsal and ventral margins extend sub−parallel to each other along the entire length of the tooth row. As in Dollodon , Equijubus , Fukuisaurus , Iguanodon , Lanzhousaurus , Mantellisaurus , and Ouranosaurus , the rostral end of the dentary is not significantly downturned, differing from the strongly deflected dentary symphysis present in Altirhinus , Protohadros , and many hadrosaurids. Rostrally, it contacts the predentary: caudally it contacts the angular and surangular. Caudodorsally, a prominent dorsally extending coronoid process is present, which is inclined at 90 ° to the long axis of the dentary. It is laterally offset with respect to the tooth row and the latter extends medial to the coronoid process. However, the process is not separated from the tooth row by an extensive horizontal shelf thereby differing from the condition present in Lanzhousaurus , Shuangmiaosaurus , and hadrosaurids. The apex of the coronoid process is obscured by the jugal. The caudoventral margin of the dentary extends beyond the caudal margin of the coronoid process, forming a sub−triangular caudal process that overlaps the surangular and angular, as also occurs in Altirhinus , Equijubus , Fukuisaurus , Lanzhousaurus , some individuals of Mantellisaurus (NHM R11521), and hadrosaurids: this feature is absent in Dollodon , Iguanodon , and Probactrosaurus . The lateral surface of this process is gently concave.

The main body of the dentary is dorsoventrally convex along most of its length; however, at the rostroventral end of the dentary the lateral surface is gently concave and the ventral margin of the dentary is strongly in−turned to meet its antimere along a broad, spout−shaped symphysis. In medial view, this in−turned portion of the dentary has a prominent rostrocaudally extending groove on its ventral surface, which is delineated by sharp ridges, dorsally and ventrally. This groove accommodated the ventral process of the predentary. The articular groove for the lateral process of the predentary is visible on the rostral surface of the left dentary: this groove does not extend as far dorsally as the tooth row, so the oral margin of the predentary would have been positioned slightly ventral to the tooth row.

A well−developed buccal emargination is present: its boundaries are formed by the medially inset tooth row and a prominent, rostrally extending lateral ridge that merges with the margin of the coronoid process. The transverse width of the buccal emargination increases caudally. Seventeen tooth positions are present. The rostral end of the dentary is not down−turned relative to rest of the bone and there is a diastema (equivalent to the length of two alveoli) between the caudal margin of the predentary and the first dentary tooth. A row of sub−circular foramina traverses the lateral surface of the dentary. The rostralmost five foramina form a line parallel to the predentary while seven additional irregularly spaced foramina comprise a row that extends parallel to the tooth row. Several other foramina are present on the lateral surface of the dentary ventral to the buccal ridge, but these are much smaller in diameter.

Surangular.—The surangular has extensive contacts with the dentary (rostrally) and the angular (ventrally): unfortunately, several areas are obscured by the displaced quadratojugal. The surangular contributes to the caudal margin of the coronoid process, but the extent of this contribution is difficult to determine. At a point approximately level with the base of the coronoid process, a small embayment is present in the rostral margin of the surangular. A similar embayment is present in this position in Altirhinus and Lanzhousaurus , but is absent in Dollodon , Equijubus , Fukuisaurus , Iguanodon , Mantellisaurus , and Protohadros .

A large circular foramen pierces the lateral surface of the surangular close to the craniomandibular joint. Just caudal to this foramen a small sub−triangular process arises from the dorsal margin of the surangular to form part of the lateral margin of the jaw articulation. Caudal to this point, the surangular tapers in dorsoventral height to form a short, blunt−ended retroarticular process that is upturned dorsally at its caudal tip. A small section of the dorsal surface can be seen: the glenoid fossa is gently concave both rostrocaudally and transversely.

Angular.—The angular is a small strap−like element that articulates with the surangular dorsally and the dentary rostrally, forming the caudoventral margin of the mandible. No other details can be determined.

Dentition.—Few details of the dentition are visible: in general, the surfaces of the maxillary teeth are obscured by the dentary teeth, while the latter are heavily worn ( Fig. 3C View Fig ). With the exception of one dentary tooth, whose lingual surface is partially exposed, all preserved teeth are visible in labial view only. A single replacement dentary tooth is visible in the sixth alveolus: no other details of tooth replacement can be determined. As far as can be ascertained, the mesially positioned teeth are the smallest in both the dentary and maxillary tooth rows: the crowns expanded mesiodistally, reaching their maximum width at a point approximately halfway along the tooth row. Distal to this point the teeth maintain similar widths until the end of the tooth row.

The maxillary tooth crowns are narrower mesiodistally than those of corresponding dentary teeth. In labial view, the maxillary crowns are lozenge−shaped and bear a strong, distally offset primary ridge. At least two, much weaker, secondary ridges are present mesial to the primary ridge: secondary ridges are also present on the maxillary teeth of Altirhinus (though they occur infrequently), Dollodon , Equijubus , Iguanodon , Lanzhousaurus , Mantellisaurus , and Ouranosaurus , but are absent in Eolambia , Protohadros , Probactrosaurus , “ Probactrosaurus ” mazongshanensis , Shuangmiaosaurus , and hadrosaurids. It cannot be determined if the crown margins are denticulate. Dentary tooth crowns are also lozenge−shaped, with their apices inclined labially. The mesial and distal margins of unworn dentary teeth are coarsely denticulate; individual denticles are mammillate. Denticles extend sub−parallel to the apicobasal axis of the crown. Most of the dentary teeth are worn and exhibit large steeply inclined apical wear−facets on their labial surfaces ( Fig. 3C View Fig ). In some cases, these wear facets appear to be continuous over adjacent teeth. The enamel is asymmetrically distributed and is thicker labially than lingually. Only one row of erupted teeth is in occlusion. The lingual surface of one dentary tooth is visible: there is a strong, distally offset primary ridge and at least one secondary ridge is positioned mesial to this; secondary ridges are also present on the dentary teeth of nearly all the above mentioned iguanodontoid taxa (with the addition of Fukuisaurus and lambeosaurine hadrosaurids: see Hall 1993), but are absent from the dentary dentitions of Shuangmiaosaurus and hadrosaurine hadrosaurids.

Stapes.—An elongate, narrow and cylindrical rod−like element visible through the infratemporal fenestra may represent the shaft of the stapes. No footplate is preserved.

Hyoid elements.—Two elongate rod−like elements that are preserved immediately ventral to the mandible represent the first ceratobranchials. Each is gently curved along its entire length and the rostral ends are slightly expanded relative to the rest of the element. A shallow groove extends along the distal surface of each element.

IVPP

Institute of Vertebrate Paleontology and Paleoanthropology

T

Tavera, Department of Geology and Geophysics

R

Departamento de Geologia, Universidad de Chile

V

Royal British Columbia Museum - Herbarium

Darwin Core Archive (for parent article) View in SIBiLS Plain XML RDF